• Please use approved power cord provided by Philips all the time. If your power cord is missing, please 1.1 Safety precautions and contact with your local service maintenance center.
1. Important • To avoid the risk of shock or Warning permanent damage to the set, do Failure to activate a screen saver, or not expose the monitor to dust, a periodic screen refresh application rain, water, or excessive moisture may result in severe “burn-in”...
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably...
Top Victory Investments Ltd. or one of its a liates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
Page 7
HDD, for example. The display must be powered ON at all times to be able to use this function. Some select Philips displays may not Power or Charge your device when it enters to “Sleep” mode (White power LED blinking).
2. Setting up the monitor Mode”, then, turn the function to “ON” 2.2 Operating the monitor mode (default=OFF). This will then keep the USB power and charging functions Description of the control buttons active even when the monitor is in sleep mode.
Page 9
Independent audio playback, regardless of video input Your Philips monitor can play the audio source independently under PIP / PBP mode, regardless of which video input. For example, you can play your 2. Toggle to the up or down to select...
Page 10
2. Setting up the monitor Note To access the OSD menu on this Philips If you selected Audio-in, the next time Display simply use the single toggle you turn on this monitor, it will by button at the bottom of the Display bezel.
Page 11
2. Setting up the monitor The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu Sub menu 1,2,3,4...
Page 12
2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 3440 × 1440 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3440 ×...
OSD menu. breeze. 1. Toggle to the right to enter OSD Why do I need it? Menu Screen. With the ultra high resolution Philips MultiView display, you can experience ...
Page 14
2. Setting up the monitor MultiView in OSD menu • PIP Size: When PIP is activated, there are three sub-window sizes to • PIP / PBP Mode: There are two choose: [Small], [Middle], [Large]. modes for MultiView: [PIP] and [PBP]. Small [PIP]: Picture in Picture Middle...
2. Setting up the monitor Note 2.4 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation.
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks.
LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by...
4. Adaptive Sync • Processor 2014 A-Series Desktop 4. Adaptive Sync and Mobility APUs • AMD A10-7850K • AMD A10-7800 Adaptive Sync • AMD A10-7700K • AMD A8-7600 PC gaming has long been an imperfect • AMD A6-7400K experience because GPUs and monitors update at different rates.
5.Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size 34" W (86.36 cm) Aspect Ratio 21:9 Pixel Pitch 0.232 x 0.232 mm SmartContrast 50,000,000:1 Response Time (typ.) 16 ms(GtG) SmartResponse 4 ms (GtG) Displayport/HDMI 2.0/USB C : Optimum Resolution 3440x1440 @ 60Hz Viewing Angle...
Page 20
5.Technical Specifications Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , 50Hz at 115VAC , 60Hz at 230VAC, 50Hz Normal Operation 66.99 W (typ.) 67.09 W (typ.) 67.19 W (typ.) Sleep (Standby) 0.5 W (typ.) 0.5 W (typ.) 0.5 W (typ.) 0.3 W (typ.)
Page 21
MEPS Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. Smart response time is the optimum value from either GtG or GtG (BW) tests.
5.Technical Specifications 5.1 Resolution & Preset Modes 5.2 Crystalclear This latest Philips display delivers Maximum Resolution Crystalclear, 3440 x 1440 images. 3440x1440@100Hz (DP/HDMI 2.0/ Utilizing high performance panels USB C with high density pixel count, 178/178 Recommended Resolution wide viewing angles, enabled by high 3440x1440@60Hz (DP/HDMI 2.0/...
6.Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced...
Page 25
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 26
7.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative.
• Shut down your computer, disconnect your old monitor and Green, red, blue, dark, and white dots reconnect your Philips monitor. appears on the screen • Turn on your monitor and then turn • The remaining dots are normal on your PC.
Page 30
Can I connect my monitor to any soft cloth. For extensive cleaning, PC, workstation or Mac? please use isopropyl alcohol. Do Ans.: Yes. All Philips monitors are fully not use other solvents such as compatible with standard PCs, ethyl alcohol, ethanol, acetone, Macs and workstations.
Page 31
In @ 60 Hz. For best display, please that case, it may not recognize use this resolution. and block the Philips USB type C power charging function. This is Q13: When I project from my notebook not a fault of the Philips display.
8.Troubleshooting & FAQs 8.3 Multiview FAQs Can I enlarge the PIP sub window ? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can toggle to the right to enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu.
Page 33
Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.