Chapter 3: System Setup
Installing a M.2 Storage Module (M key 2242)
1. Locate the M.2 M key slot on the board and remove the screws on the
board.
Screw for M.2 M key
M.2 M key slot
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
2. Insert the M.2 module into the M.2 slot at a 45-degree angle until the
gold-plated connector on the edge of the module completely disappears
into the slot.
3. Push the module down and secure it with the screw that was removed
from step 1.
27
NDiS B337-4C User Manual