GRASS VALLEY OCP400/20 Maintenance Manual page 5

Operational control panel
Table of Contents

Advertisement

Notices
Warnings
• Any instructions in this manual that require opening the equipment cover or enclosure
are for use by qualified service personnel only.
• Do not operate the equipment in wet or damp conditions. If the unit is in a wet or
damp environment, a rain cover must be used to protect it for personal safety reasons.
• Disconnect power before cleaning the equipment. Do not use liquid or aerosol
cleaners; use only a damp cloth.
• Dangerous voltages may exist at several points in this equipment. To avoid injury, do
not touch exposed connections and components while power is on.
• Prior to servicing, remove jewelry such as rings, watches, and other metallic objects.
• To avoid explosion, do not operate this equipment in an explosive atmosphere.
• Have qualified service personnel perform safety checks after any service.
Cautions
• Products that have no on/off switch, and use an external power supply must be
installed in proximity to a main power outlet that is easily accessible.
• Do not operate with suspected equipment failure. If you suspect product damage or
equipment failure, have the equipment inspected by qualified service personnel.
• To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel.
• Follow static precautions at all times when handling this equipment. Servicing should
be done in a static-free environment.
• Provide proper ventilation. To prevent product overheating, provide equipment
ventilation in accordance with the installation instructions. Do not block the hot airflow
coming from air outlet(s).
iv
A warning indicates a possible hazard to personnel, which may cause injury or
death. Observe the following general warnings when using or working on this
equipment:
A caution indicates a possible hazard to equipment that could result in equipment
damage. Observe the following cautions when operating or working on this
equipment:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ocp400/30

Table of Contents