Page 1
Release Date: 2016 - 06 - 25 Instruction Manual High-Definition Link for Audi A3(8V) IW04A3-N Model Name IW04A3-N Latest Firmware Date 2015 - 05 - 12 Manual Version Rev. 2.5 Language English...
Cautions IW04A3-related • You should check the names and colors of each wires exactly, before you connect the wires. ex) CAN HIGH: White wires / CAN LOW: Blue wires • The ‘POWER / CAN Cable’ should always be connected last and be disconnected first. •...
Dimension Width: 142 mm Height: 22 mm Length: 91 mm ⓐ ⓑ ⓒ ⓓ ⓔ Exterior ⓐ DIP SWITCH ⓑ AV IN / OUT ⓒ TOUCH IN (Not Used) ⓓ MODE ⓔ POWER / CAN ⓕ HDMI IN ⓖ 5V USB POWER ⓗ...
Page 5
Power / CAN Cable LVDS Cable LVDS PCB HDMI Cable AV IN / OUT Cable 5-pin Micro USB Cable (For LVDS) Optional Parts (sold separately at the indiwork) HDMI Cable HDMI Extender Mode Switch (Male to Male) (For stick type HDMI device)
Full Installation Diagram Main Connector of Head Unit(In the Glovebox) ※ Optional External Devices Mode Switch (optional) NAVI 12V OUT RV-CAM Video Input External Rear View 12V Power Output & GND Output(RV-CAM Power) Camera Reverse Signal Detection(optional) DIP S/W Setting GND(Black) Pin # 15 = GND(Brown) NAVI Audio Input...
HDMI Connection Diagram HDMI Device HDMI Device HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER HDMI HDMI HDMI HDMI (5V-1A Power output for HDMI Device) (5V-1A Power output for HDMI Device) (Male) (Female) (HDMI Extender)
Page 8
Navigation Connection Diagram Navigation Connection Diagram Navigation(GPS) Box Navigation(GPS) Box HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER HDMI HDMI Touch screen panel Touch screen panel (USB cable connecting is for ‘N-Link’...
Compatibility Chart for Navigation(GPS) box models Dip S/W Model Country Required Parts (Navigation) MICROCITY South Korea N-Link HDMI Cable USB A-A Cable Hazard Module (HDMI to HDMI) (USB to USB) (Refer to Page.11) ↓ iNAVI South Korea X1 CUBE OFF(↑): 1, 2, 3, 4 HDMI Cable (HDMI to HDMI) ↑...
LVDS Connection Diagram LVDS Connection HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER Multimedia System - OEM Head Unit HDMI (Connector Color: Pink or Gray) • 'Genuine(OEM) LVDS connector' should be connected to 'LVDS IN / OUT PCB'. OEM Monitor •...
Body Connector specifications POWER / CAN AV IN / OUT DIP SWITCH MODE TOUCH-IN (No. 1, 2 Pins) Length: 20 cm Length: 100 cm Length: 150 cm BATTERY POWER INPUT RV-CAM VIDEO INPUT GND(RV-CAM VIDEO) GND INPUT RV-CAM POWER OUT GND OUTPUT(RV-CAM) REVERSE DETECTION IR OUT...
Car Compatibility Chart Production Car Models Specific Models Year 2013 - IW04A3 is used in combination with Audi(A3) MMI(Multi Media Interface) system. Audi A3 MMI Radio Audi A3 MMI navigation plus The IW04A3 supports the Audi(A3) original screen equipped with ‘4-Pin LVDS round connector’...
Activation by original buttons Button Function Operation Remarks Changing Order: HDMI → NAVI → AV2 → OEM Press the button 2 seconds long. Modes NAV(TONE) Press the button 2 times quickly. < OEM → NAVI > Shortcut to Each modes Press the button 3 times quickly.
Settings Button Function Operation Enter into the MENU Press the button 5 seconds long. setting menu Back to previous BACK Press the button short. menu Select the menu Selection Press the button short. and setting values. Move the menu- Turn the dial Move the pointer and setting pointer and adjust clockwise...
Settings 4. Rear view camera settings - Parking guide lines = Adjust position of parking guide lines and select the lines ‘ON or OFF’. - Parking distance control = Adjust position of Parking Distance Control sensors to ‘LEFT or RIGHT’ and select PDC function ‘ON or OFF’. - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of Rear view camera display.
Settings 6. Automatic activation function(AV1) - Shift gear from reverse to drive - Shift gear from parking to drive * When you shift gear ‘from reverse to drive’ or ‘from parking to drive’, it just works automatically during the activation time you selected. 7.
- Factory default = Reset all setting values to factory default setting. 9. System information - Mode name: IW04A3-N - Firmware date: 2015 - 05 - 12 (Latest firmware date) - = You can check the current firmware version date.
Settings 10. Information of Dip switch settings * You can check current positions of dip switch settings. ex 1) ex 2) Actual DIP switch values. (→) Actual DIP switch values. (→) Appears on the setting menu. (↓) Appears on the setting menu. (↓)
Page 21
Copyright ⓒ indiwork. All Rights Reserved.