Page 1
Release Date: 2014 - 05 - 08 BMW Easy Access Seats Components Version Information Model Name BMW Easy Access Latest Firmware Date 2014 - 05 - 08 Manual Version Rev. 1.0 Manual Release Date 2014 - 05 - 08 Module...
Page 3
1) Remove the glovebox under cover. 2) Unplug the ’54-pin connector(Light Blue)’ of fuse box. ※ CAUTION ※ You have to unplug the connector after turn off the ignition.
Page 4
3) Splice the ‘IN CAN H(No.3 / White) wire’ to 4) Splice the ‘IN CAN L(No.4 / Green) wire’ to ‘No.1 wire(Yellow/Red)’ of the 54-pin connector. ‘No.2 wire(Yellow/Brown)’ of the 54-pin connector. < CAN HIGH connection > < CAN LOW connection >...
Page 5
Fixing Pin (Engine room direction) 6) Splice the ‘BAT+(No.1 / Yellow) wire’ to 5) Remove the relay in front of fuse box. ‘Red wire in the direction of the engine room(Battery power)’. (Rotate it counterclockwise.) < No.2(GROUND)wire should be connected with ground of the car.>...
Page 6
7) Set the DIP switch for BMW 5 Series(F10 / 6-Pin LVDS). 8) Driver’s seat is moved to the memory position No.1(ⓐ) automatically, when you turn on the ignition. The seat is moved back to the memory position No.2(ⓑ), when you turn off the ignition.