Page 1
Release Date: 2016 - 06 - 25 Instruction Manual High-Definition Link for Volkswagen Golf(MK7) IW04VW Model Name IW04VW-N Latest Firmware Date 2015 - 11 - 11 Manual Version Rev. 2.9 Language English...
Navigation(GPS) box-related • When you connect the power wires(B+, ACC) to the navigation(GPS) box, the ‘NAVI 12V OUT' wire supported by IW04VW should be spliced with an ACC wire of navigation box. • After installation is done, select an applicable navigation(GPS) box model in the 'Navigation model selection menu' of setting mode.
Page 4
Dimension Width: 142 mm Height: 22 mm Length: 91 mm ⓐ ⓑ ⓒ ⓓ ⓔ Exterior ⓐ DIP SWITCH ⓑ AV IN / OUT ⓒ TOUCH IN (Connect To Set top Device) ⓓ MODE ⓔ POWER / CAN ⓕ HDMI IN ⓖ...
Page 5
Power / CAN Cable LVDS Cable LVDS PCB HDMI Cable AV IN / OUT Cable 5-pin Micro USB Cable (For LVDS) Optional Parts (sold separately at the indiwork) HDMI Cable HDMI Extender Mode Switch (Male to Male) (For stick type HDMI device)
Full Installation Diagram Main Connector of Head Unit Main Connector of Head Unit(In the Glovebox) ※ Optional External Devices Navigation Box Mode Touch Cable Switch for Navigation (optional) RV-CAM Video Input External Rear View 12V Power Output & GND Output(RV-CAM Power) Camera Reverse Signal Detection(optional) OEM Monitor...
HDMI Connection Diagram HDMI Device HDMI Device HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER HDMI HDMI HDMI HDMI (5V-1A Power output for HDMI Device) (5V-1A Power output for HDMI Device) (Male) (Female) (HDMI Extender)
Navigation Connection Diagram Navigation Connection Diagram Navigation(GPS) Box Navigation(GPS) Box HDMI IN 5V USB NAVI IN UART I/F LVDS OUT HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER POWER HDMI HDMI TOUCH TOUCH (USB cable connecting is for ‘N-Link’ only.) I-NAVI X1 CUBE Microcity - N-Link...
↑ MYVI South Korea MS1400 Digital OFF(↓): 1, 2, 3 HDMI Cable ON(↑) : 4 (HDMI to HDMI) • The 'IW04VW (HD-Link)' supports navigation(GPS) box models equipped with 'Digital video output'. • It does not support the 'RGB video signals'.
LVDS Connection Diagram LVDS Connection HDMI IN 5V USB NAVI IN UART I/F LVDS OUT POWER OEM Monitor HDMI (Provided LVDS Cable) • 'Genuine(OEM) LVDS Connector' should be connected to ‘LVDS IN / OUT PCB'. • ‘Provided LVDS Connector' should be connected to the Multimedia System - OEM Head Unit OEM monitor instead to the genuine connector.
Body Connector specifications POWER / CAN AV IN / OUT DIP SWITCH MODE TOUCH-IN (NO. 1, 2 Pins) 1 2 3 4 Length: 20 cm Length: 100 cm Length: 150 cm Length: 100 cm BATTERY POWER INPUT RV-CAM VIDEO INPUT GND(RV-CAM VIDEO) GND INPUT RV-CAM POWER OUT...
Car Models Specific Models Year Golf 2010 - Polo 2014 - The IW04VW is used in combination with Volkswagen Infotainment System. VW Golf Discover Pro(8-inch) VW Golf Discover Media(5.8-inch) VW Golf Composition Media(5.8-inch) VW Polo Composition Media(6.5-inch) The IW03GF supports the Chevrolet(GM) original screen &...
System If you visit car service center, you can lock the all Locking / Press the button 10 seconds long. functions of IW04VW. It is only possible to use the MENU Unlocking OEM functions under it is locked. Back to OEM Press the buttons short.
Press the ‘CAR’ button Enter into the setting menu 5 seconds long. (Head Unit Controller) All functions of setting menu of IW04VW is controlled Touch Screen (OEM Monitor) by a touch screen of the OEM monitor. 1. Enter into the setting menu.
Settings 4. Rear view camera settings - Parking guide lines = Adjust position of parking guide lines and select the lines ‘ON or OFF’. - Parking distance control = Adjust position of Parking Distance Control sensors to ‘LEFT or RIGHT’ and select PDC function ‘ON or OFF’. - Image display = Adjust the values of brightness and contrast Red-Green-Blue colors of Rear view camera display.
Settings 6. Automatic activation function(AV1) - Shift gear from reverse to drive - Shift gear from parking to drive * When you shift gear ‘from reverse to drive’ or ‘from parking to drive’, it just works automatically during the activation time you selected. 7.
- Factory default = Reset all setting values to factory default setting. 9. System information - Mode name: IW04VW-N - Firmware date: 2015 - 11 - 11 (Latest firmware date) - = You can check the current firmware version date.
Page 20
Copyright ⓒ indiwork. All Rights Reserved.