Page 1
Release Date: 2014 - 05 - 08 BMW Easy Access Seats Components Version Information Model Name BMW Easy Access Latest Firmware Date 2014 - 05 - 08 Manual Version Rev. 1.0 Manual Release Date 2014 - 05 - 08 Module...
Page 2
Release Date: 2014 - 05 - 09 Installation Manual BMW Easy Access Seats 1 Series 3 Series 4 Series (F20) & (F30) & (F32)
Page 3
1) Remove the ‘AIRBAG’ cap in driver’s seat. 2) Remove the ‘25T screw’ holding the side cover.
Page 4
3) Remove the seat side cover. 4) Unplug a connector of the seat memory.
Page 5
5) Splice the ‘4 PIN(No.7 / Red) wire’ to 6) Splice the ‘7 PIN(No.8 / White) wire’ to ‘No.4 wire(Blue/Red)’ of the 10-pin connector. ‘No.7 wire(Blue/White)’ of the 10-Pin connector. < BMW-F30 4 PIN connection > < BMW-F30 7 PIN connection > 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10...
Page 6
7) Unplug the ‘44-pin connector(Yellow)’ under the driver’s seat. 8) Separate the harness from the connector. ※ CAUTION ※ You have to unplug the connector after turn off the ignition.
Page 7
6 5 4 3 2 1 10) Splice the ‘IN CAN H(No.3 / White) wire’ to 9) Specification of the 44-pin connector ‘No.6 wire(Yellow/Red)’ of the 44-pin connector. < CAN HIGH connection > < CAN HIGH & LOW > No.5-pin(Yellow/Brown) = CAN LOW No.6-pin(Yellow/Red) = CAN HIGH 16 15 14 <...
Page 8
11) Splice the ‘IN CAN L(No.4 / Green) wire’ to 12) Splice the ‘BAT+(No.1 / Yellow) wire’ to ‘No.5 wire(Yellow/Brown)’ of the 44-pin connector. ‘No.15 wire(Red/Brown)’ of the 44-pin connector. < CAN LOW connection > < POWER connection > 16 15 14 16 15 14...
Page 9
13) Splice the ‘GROUND(No.2 / Black) wire’ to 14) Set the DIP switch for BMW 1, 3, 4 Series. ‘No.16 wire(Brown)’ of the 44-pin connector. < GROUND connection > 16 15 14...
Page 10
ⓐ ⓑ 15) Fix the easy access module under the seat. 16) Driver’s seat is moved to the memory position No.1(ⓑ) automatically, when you turn on the ignition. The seat is moved back to the memory position No.2(ⓐ), when you turn off the ignition.