Maple Systems IO-SD3200I User Manual page 6

Precautions for wiring of Digital Input/Output Module (
Select a cable considering ambient temperature and allowable current AWG 22 (0.3 mm
more is recommended.
If the wiring is too close to a heat-generating device or directly contacted with oil for long
periods of time it may cause a short circuit, breakdown or malfunction.
Precautions for test run and repair (
Please do not touch the terminals when the power is on. Doing so could cause an electric
shock or malfunctions.
When cleaning or tightening the screws, turn off the power of the PLC and all other systems.
Failure to do so could cause an electric shock or malfunctions.
Do not charge, disassemble, heat up, short, or solder the battery. Doing so could cause the
battery to heat up, rupture, or ignite, thereby harming the user.
Precautions for test run and repair (
Do not dissociate the PCB from the module's casing or make any modifications to the device.
Doing so may cause fire, electric shock, or malfunction.
When mounting or separating the module, make sure to turn off power to the PLC and all other
devices. Failure to do so could cause an electric shock or malfunctions.
Use radio, walkie-talkie, or cellphone devices at least 30cm away from the PLC. Not doing so
could result in malfunction.
Precautions for disposal (
When the product is disposed of, it should be done according to your country's regulations for
similar types of industrial waste. Not doing so may cause an occurrence of toxic substances or
explosions.
Warning)
Caution)
Caution)
- 6 -
Caution)
2
) or