ENACFIRE G10 - Wireless Earbuds Manual

Table of Contents

Contents

1 Packaging List
2 Product Overview
3 Power On & Pairing
- 3.1 Approach 1 - With Charging Case
- 3.2 Approach 2 - Without Charging Case
4 Incoming call
- 4.1 Answer call/End call
- 4.2 Reject call
5 Music
6 Power Off
- 6.1 Without Charging Case
7 Single Mode
8 Game Mode
9 Charging
- 9.1 Earphones
- 9.2 Charging Case
10 Safety Instruction
11 Customer Support
12 Documents / Resources
- 12.1 References
- 12.2 Download manual

Packaging List

Product Overview

Product Overview - Part 1

Charging port
Charging case LED light
Multifunctional button
Earphone LED
Earphone mic
L/R logo
Magnetic charging pin
Speaker

Power On & Pairing

Approach 1 - With Charging Case

Approach 1 - With Charging Case - Step 1
Take out earphones from the charging case

Approach 1 - With Charging Case - Step 2
Select 'ENACFIRE G10' from Bluetooth list

Approach 2 - Without Charging Case

Power On: Touch the R/L earphones for 2 seconds Prompt sound 'Power on'
Pairing: R/L earphone Blue and White light flash alternately,
Select 'ENACFIRE G10'

Incoming call

Answer call/End call

Tap the Left / Right earphone once

Reject call

Touch the Left/ Right earphone for 2 seconds

Music

Pause / Play

Tap the Left / Right earphone once (Some phones may require to start a media player first)

Voice Assistant

Tap the Left / Right earphone 3 times

Change Song

Double-tap the Left/Right earphone to previous / next song

Adjust Volume

Touch and hold the Left / Right earphone to decrease / increase volume

Power Off

Without Charging Case

Without Charging Case
Turn off Bluetooth to disconnect the earphones
Touch either one earphone for 8 seconds to power off both earphones

Single Mode

Single Mode	Earphone
Without Charging Case	Make sure both earphones are turn off Touch the Left/ Right earphone for 2 second to turn on Prompt sound 'Pairing' will be produced with Blue and White light flash alternately Select 'ENACFIRE G10' from Bluetooth list

Game Mode

Game Mode On: Tap Left / Right earphones 4 times with prompt sound: Game mode
Game Mode Off: Tap Left / Right earphones 4 times with prompt sound: Game off

Charging

Earphones

Earphone LED Light On: Charging
Earphone LED Light Off: Fully Charged

warning Note: It takes about 1.5 hours to fully charge the earphones

Charging Case

Put the earphones back to the case. Lights on charging case stand for the remaining battery capacity.

warning Note: It takes about 1.5-2 hours to fully charge the charging case

Charging Case
1/3 Battery Left
2/3 Battery Left
Fully Charged

Safety Instruction

Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety. Do not use while driving cycling, operating machinery or performing other activities that require hearing surrounding sounds.
Do not use earphones in thunderstorm weather, the earphones may not work properly in the bad weather condition, and may increase the risk of being hit by lightning.
Earphones may not work properly under high temperature or high humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphones. If the earphones come in contact with liquids, quickly wipe away. If submersed in the water, do not turn the earphones on until it is completely dried.

information Tips: Man-made damage and lost are not covered under warranty. Keep the earphones and the packaging out of reach of children.