ENACFIRE F1 - Wireless Earbuds Manual

Packing List

Product Overview

1. Charging port
2. USB Output
3. Charging case LED light
4. Multifunctional button
5. Earphone LED light and Mic
6. Acoustic hole.
7. L/R Logo
8. Magnetic Charging Pin
9. Speaker

Wearing

Step 1: Choose the suitable eartips

Step 2: Wear it and adjust to a comfortable position
(Please distinguish between the left and right earphone)

Power On & Pairing

Approach 1 -With Charging Case

Power On: Take out the earphones from the charging case with Blue light on
Pairing: Earphones Will start paring automatically With Blue and White light flash alternatively
Connection: Select "ENACFIRE F1" from the device's Bluetooth list
Note: Left earphone is the master earphone

Approach 2 - Earphones Standalone

Power On: Touch the multifunctional buttons for 2 seconds. Release when you hear the prompt sound Power on' with Blue light on Pairing; Earphones will Start paring automatically with Blue and White light flash alternatively
Connection: Select "ENACFIRE F1" from the device's Bluetooth list
Note: Left earphone is the master earphone

Disconnection

Reason 1: Device's Bluetooth Function Turned Off

If the Bluetooth is turned off, earphones will be disconnected, After 5 minutes of reconnection timeout, the earphones will power Off automatically.

Reason 2: Out of Connection Distance

If the connection distance between the device and the earphones exceeds the effective range, the earphone will power off automatically after 5 minutes of reconnection timeout.

Incoming call

Answer call/End call

Tap the multifunctional button of either earphone once

Reject call

Touch the Left or Right multifunctional button for 2 seconds

Music

Pause/ Play

Double-tap the Right multifunctional button to pause/play music in the music mode
(Some phones may require you to start a media player first)

Voice Assistant

To launch your Device's Voice Assistant, double-tap the Left multifunctional button with the 'Beep' prompt sound.

Next song

Touch the Right multifunctional button for 2 seconds

Previous song

Touch the Left multifunctional button for 2 seconds
Note: This function is not supported when earphone Is used in single

Single Mode

Note: Make sure earphones are turned off before using Method 2

Power Off

Mode 1
Put the earphones back to the charging case, they will power off automatically
Note: Put only the Left earphone into the charging case, the Right earphone will disconnected and start pairing
Put only the Right earphone into the charging case. The Len earphone will stay connected

Mode 2
Earphones Standalone
When the earphones are ON, touch either one multifunctional button for 6 seconds, both earphones will power off.

Charging

Earphones charging Status

Earphones LED light on: Charging
Earphones LED light off; Fully charged

Note: It takes about 1.5 hours to fully charge the earphones

Charging case charging Status

Lights on charging case stand for the remaining battery capacity
Note: It takes about 3 hours to fully charge the charging case

Q&A

Q: Why the music cuts In and out sometimes?
A: Please make sure there is no obstacle between the earphones and your device. Please make sure there is no Microwave oven / Wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
Note: Please keep your phone and the master earphone (L) as close as possible, ensure more stable Bluetooth connection.

Q: What should 1 do if there are connectivity and pairing Issues?
A: Please make sure both earphones have been turned off and try to forget all the devices' name in your mobile phone's Bluetooth list. Then reconnect the earphones to the mobile phone.

Q: How to contact EUCHRE Customer Service Team?
A: If you have any issue with the product, please contact us via support@enacfireglobal.com (LIS/ CA) / moongu@enacfireglcbal.com (UK). We will reply to you within 24 hours and 100% solve your issue.

Safety Instruction

Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It's advised that you keep volume levels moderate to low at all times for your safety.
Do not use while driving, cycling, operating machinery or performing other activities that require hearing surrounding sounds.
Do not use earphones in thunderstorm weather, the earphones may not work properly in the bad weather condition, and may increase the risk of being hit by lightning.
Earphones may not work properly under high temperature or high humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphones. If the earphones come in contact with liquids, quickly wipe away. If submersed in the water, do not turn the earphones on until it is completely dried.