ENACFIRE H500 - Wireless Earbuds Manual

ENACFIRE H500 - Wireless Earbuds Manual

Advertisement

ENACFIRE H500 - Wireless Earbuds Manual

Packaging List

Product Overview

Product Overview - Part 1

  1. Charging Case LED Light
  2. Charging Port
    Product Overview - Part 2
  3. Multifunctional Button
  4. Earphone Mic
  5. Magnetic Charging Pin
  6. Earphone LED Light

Power On & Pairing

Approach 1 - With Charging Case

  1. Take out earphones from the charging case
  2. Select 'ENACFIRE H500' from Bluetooth list
    Approach 1 -With Charging Case

Approach 2 - Without Charging Case

  1. Power On: Touch the earphones for 1 second. Release when you hear the prompt sound 'Power on' with Blue light on.
    Approach 2 - Without Charging Case
  2. Pairing: Earphones will pair automatically with Left earphone Blue and White light flash alternately
  3. Select 'ENACFIRE H500' from the device's Bluetooth list

Incoming call

Answer call/End call

Answer call/End call
Tap the Left / Right earphone once

Reject call

Reject call
Touch the Left / Right earphone for 2 seconds

Music

Pause / Play


Tap the Left/ Right earphone once to pause / play music in the music mode
(Some phones may require to start a media player first)

Voice Assistant


Tap the Left/ Right earphone 3 times, your device's Voice Assistant will be activated with the 'Beep' prompt sound

Next Song


Double-tap the Right earphone

Previous Song


Double-tap the Left earphone

Adjust Volume

Adjust Volume
Touch and hold the Left earphone to decrease volume
Touch and hold the Right earphone to increase volume

warning Note: Above functions are not supported when the earphone is used in single. Prompt sound 'Beep' will be produced when the volume is changing.

Power Off

Mode 1 With Charging Case


Put the earphones back ro the charging case, they will power off automatically.

warning Note: Put either one earphone into the charging case, the another earphone will stay connect to the device.

Mode 2 Without Charging Case

Mode 2 Without Charging Case

  1. Turn off Bluetooth to disconnect the earphones
  2. Touch either one earphone for 8 seconds to power off both earphones

Single Mode

Single Mode Earphone
With Charging Case
  1. Take out Left/ Right earphone from the charging case
  2. Select 'ENACFIRE H500' from Bluetooth list
Without Charging Case
  1. Make sure both earphones are turn off
  2. Touch the Left/Right earphone for 1 second to turn on. Prompt sound Pairing will be produced with Blue and White light flash alternately.
  3. Select 'ENACFIRE H500' from Bluetooth list

Charging

Earphones Charging Status

Earphones white LED light on: Charging
Earphones white LED light off: Fully charged

warning Note: It takes about 1.5 hours to fully charge the earphones

Charging Case Charging Status

Put the earphones back to the charging case
Lights on charging case stand for the remaining battery capacity

warning Note: It takes about 1.5-2 hours to fully charge the charging case

Charging Case Charging Status
1/3 Battery Left
2/3 Battery Left
Fully charged

Q&A

Q: Why the music cuts in and out sometimes?
A: Please make sure there is no obstacle between the earphones and your device, Please make sure there is no Microwave oven / Wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
warning Note: Please keep your phone and the earphone as close as possible to ensure a more stable Bluetooth connection.

Q: What should I do if the earphones Stop charging?
A: We recommend you to charge the earphones by using our cable. If our cable do not work, please try to use another charging cable or power source to charge the earphones.

Q How to contact ENACFIRE Customer Service Team?
A: If you have any issue with the product, please contact us vie
support@enacfireglobal.com (LIS/ CA) /
moongu@enacfireglobal.com (UK),
We will reply to you within 24 hours and 100% solve your issue.

Safety Instruction

Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety.
Do not use while driving, cycling, operating machinery or performing other activities that require hearing surrounding sounds.
Do not use earphones in thunderstorm weather, the earphones may not work properly in the bad weather condition, and may increase the risk of being hit by lightning.
Earphones may not work properly under high temperature or high humidity conditions.
Do not use any corrosive cleaner/oil to clean the earphones. If the earphones comp in contact with liquids, quickly wipe away. If submersed in the water, do not turn the earphones on until it is completely dried

information Tips: Man-made damage and lost are not covered under warranty. Keep the earphones and the packaging out of reach of children.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ENACFIRE H500 - Wireless Earbuds Manual

Advertisement

Need help?

Need help?

Do you have a question about the H500 and is the answer not in the manual?

Questions and answers

Table of Contents