Motorola Verveloop 2+ SH020 -Waterproof, Wireless Stereo Earbuds Manual

Table of Contents

Contents

1 Technical Data
2 At a Glance
3 Charge
4 Wearing
5 Connect & Go
6 Buttons Operation
7 LED Indicators
8 Hubble Connect for VerveLife
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Technical Data

Model: Verveloop2+
Frequency Band: 2.402 - 2.480GHz
Maximum RF power: 7.5 dBm
Working Temperature: 0°C - 45°C
Product ID: SH020
Bluetooth ID: D036701
FCC ID: VLJ-SH020
IC: 4522A-SH020

At a Glance

Device Overview

Left Earbud
Right Earbud
Micro USB Port
Volume Up/Next Track
Microphone
Multi-Function Button (MFB)
Volume Down/Last Track
LED Indicator

Charge

Fully charge before use. Any attempt to remove or replace your battery will damage your headset.
Charging the unit

Wearing

Wearing - Adjusting cable management with a clip
Place the cable behind your head and adjust the cable management clip to your specific comfort and activity level

Wearing - Cable position for using the microphone
For best microphone performance release the cable management clip and place cable in front of head

Connect & Go

Turn on Bluetooth on your device
Turn on and Pair your headset by pressing the Multi-Function Button. Look for Blue and Red Flashing Lights
On your device, go to Bluetooth setting and select "Verveloop2+" to pair.
When pairing is completed, you will hear a tone
After first time, the headset will auto reconnect to the device when powered on

Buttons Operation

Music
Play / Pause	Press MFB
Volume Down / Up	Press - / +
Next Track	Double press MFB
Previous Track	Triple press MFB
Change Equalizer	Long press + & -
Calls
Answer / end call	Press MFB
Reject a call	Long Press - / +
Call waiting
Receive incoming call and end ongoing call	Triple press MFB
Receive incoming and on hold ongoing call	Press MFB
Mute during call	Press - and +
Re-dial last call	Double press MFB
Pair
Enter pairing mode (first time)	Press MFB
Enter pairing mode	Press and hold MFB
Voice
To issue a voice command during idle mode, then say the command	Long Press - / +

LED Indicators

Charging Case (LED at the front)
Pairing	Red-blue flash
Standby	Blue flash
Charging	Red steady
Fully charged	Blue steady
Battery low	Red flash

Hubble Connect for VerveLife

Download 'Hubble Connect for VerveLife' app for free at the App Store or Google Play (Android 4.4.4 or higher) to find more functions:

Last connected location: Locate in a map where your earbuds were connected to your device last time.
Help: Get help and support.
Update for more advanced functions to come

Note: Application feature may change over time, please download the latest version of the app to see all current feature supported.