Motorola SH067 - True wireless Earbuds Manual

Also See for SH067:

Quick start manual (4 pages)

Table of Contents

Contents

1 Charging
2 Pairing
3 Fitting
4 Basic Operation
5 Motorola SH067 Factory reset
6 Specifications
7 Documents / Resources
- 7.1 Download manual

Motorola SH067 - True wireless Earbuds Manual

Charging

Charging Fully charge before use
The device can be powered through a Type-C from any CE compliant power source that implement the European interface as requested by EN 301 489-52.

Pairing

Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
Select "Motobuds Charge" from the smartphone Bluetooth menu.

Fitting

To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
Insert the Vervebuds into your ear and rotate to fit comfortably.

Basic Operation

Motorola SH067 Factory reset

Ensure earbuds are not connected to phone
Double press MFB and then hold MFB for 5 second until LED shows blue and red
Put both buds into the charging case

Additional Operation
Reject a call	MFB 2sec
Receive incoming and on hold ongoing call	Single Press MFB
LED Indicator
Pairing	Red-blue flash
Standby	Blue flash
Charging	Red steady
Fully charged	Off
Battery low	Red flash

Specifications

Model No.	SH067	Working temperature:	-10ºC–45ºC
Frequency Band	2.402 – 2.480GHz	Product ID	SH067
Maximum RF power	6 dBm	FCC ID	VLJ-SH067
IFETEL ID	RCPMOSH20-1529	IC	4522A-SH067