Motorola Stream Sport SH015 - True Wireless Stereo Earbuds Manual

Model: Motorola Stream Sport
Motorola Stream
Product ID: SH015
FCC ID: VLJ-SH015
Frequency: 2.402 – 2.48 GHz
IC: 4522A-SH015
Maximum RF Power: 6 dBm
Software Version: 1.0
Working temperature: 0°C to 45°C

At a glance

1. Multi-function Button (MFB)
2. Skip Forward / Volume Up (+)
3. Skip Back / Volume Down (-)
4. Earbuds LED
5. Microphone
6. Latch Button
7. Earbud charging contacts
8. Charging LED Indicator
9. Micro USB charging port
10. Charging Case Battery LEDs

Charge

Charging Your Earbuds

To charge the earbuds, put them into the charging case. The blue LEDs show that they are charging.

Charging Your Charging Case

Plug the charging cable into the micro USB port at the back of the case. Red LED lights until the fully charged.

Note: Fully charge before use. The battery should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage the product and void your warranty.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED PRODUCT PROPERLY.

Pairing both earbuds (stereo) with your device

Pairs both earbuds for stereo music experience

STEP 1 – Turning On the Earbuds

Press the multi-function button for 2 seconds on both earbuds.

STEP 2 – Wearing

Insert the earbuds in your ear and rotate to find a best fit position.

STEP 3 – Connecting the Earbuds to Each Other

When both Left and Right earbuds are turned on, they will automatically connect to each other. If they don't connect, simply put it back to the charging case and repeat step 1.

STEP 4 – Connecting to a Device

Enable the Bluetooth on your device. From the Bluetooth menu, select "Stream". You will hear a voice prompt when the device and Motorola Stream are connected.

Auto Reconnect

After first-time pairing to a device, earbuds will auto reconnect to the device when powered on and within Bluetooth range of the device.

Pairing single earbud (mono) for voice calls

Allows either earbud to be used as a mono voice headset

Left Earbud (Mono)

STEP 1 – Turning On the Left Earbud

Press the multi-function button for 2 seconds on Left earbud.

STEP 2 – Wearing

Insert the earbuds in your ear and rotate to find a best fit position.

STEP 3 – Connecting to a Device

Enable the Bluetooth on your device. From the Bluetooth menu, select "Stream". You will hear a voice prompt when the device and Motorola Stream are connected.

Right Earbud (Mono)

STEP 1 – Turning On the Right Earbud

Press the multi-function button for 2 seconds on Right earbud.

STEP 2 – Wearing

Insert the earbuds in your ear and rotate to find a best fit position.

STEP 3 – Connecting to a Device

Enable the Bluetooth on your device. From the Bluetooth menu, select "Stream Mono". You will hear a voice prompt when the device and Motorola Stream are connected.

Buttons Operation

LED Indicators

© 2017 Motorola Mobility LLC. All rights reserved.