Motorola VERVEBUDS 200 - Wireless Earbuds Manual

Table of Contents

Contents

1 Charging
2 Pairing
3 Fitting
4 Base Operation
5 Value-added Feature
6 Documents / Resources
- 6.1 Download manual

Charging

Fully charge before use
The device can be powered through a micro USB from any CE compliant power source that implement the European interface as requested by EN 301 489-52.

Pairing

Ensure both buds are inside the charging case with lid closed then open up the lid and take out the headset. The buds will flash blue and red.
Select "Vervebuds 200" from the smartphone Bluetooth menu.

Fitting

Insert the Vervebuds into your ear and rotate to fit comfortably.
To optimize the best fit and audio experience, it is recommended to try different earbud sizes.

Base Operation

Additional Operation
Factory reset	Switch o both buds, then hold both MFB for 10 sec until it shows PURPLE LED
Reject a call	Long Press MFB
Mute during call	Double Press MFB
Receive incoming call and end ongoing call	Double Press MFB
Receive incoming and on hold ongoing call	Single Press MFB
Voice command (Siri/ Google/Alexa)	Double Press MFB (only available in standby mode)
LED Indicator
Pairing	Red-blue flash
Standby	Blue flash
Charging	Red steady
Fully charged	Off
Battery low	Red flash

Value-added Feature

To use the buds independently (mono mode) please follow this pairing sequence.

Open the charging case and take out the L Bud, then close the case. The L Bud will then flash blue and red.
Select "Vervebuds 200(L)".

MODELS: VERVEBUDS 200
Frequency Band: 2.402 – 2.480 GHz
Maximum RF power: 6 dBm
Working temperature: -10 o C – 45 o C
Product ID: SH036
FCC ID: VLJ-SH036
IC: 4522A-SH036