Advertisement
Aqara Vibration Sensor is embedded with a high precision acceleration sensor and it detects the vibration and movement of objects. It communicates with the Hub via Zigbee protocol. It also works with other smart accessories to set various smart scenes, such as, local and remote alarm when it detects glass breaks.
Reset Button
Long Press for 5s: Reset/Connect to Network
Single Press: Effective Range Test
* If the connection fails, please move the accessory closer to the Hub and try again.
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
* Avoid metal surface to maximize signal strength.
Option 1: Place it directly in the desired position.
Option 2: Remove the protective film, and stick it to the desired position.
* Keep the surface clean and dry.
Model: DJT11LM
Dimensions: 36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in.)
Wireless Protocol: Zigbee
Battery: CR2032
Operating Temperature: -10° – +50°C (14°F – 122°F)
Operating Humidity: 0 – 95% RH, no condensation
Maximum Transmit Power (Zigbee): 9.99dBm
Working Frequency: 2400 MHz – 2483.5 MHz
Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Vibration Sensor that isn't answered in the manual? Leave your question here.