Download Print this page

Aqara MCCGQ11LM User Manual

Door and window sensor

Advertisement

Quick Links

The Door and Window Sensor User's Manual
Introduce
Aqara's Door/Window Sensor (DWS) is a smart device featuring low power
consumption, small size, and cost-efficiency, utilizing the ZigBee© wireless protocol. It is
powered by a CR1632 battery, and complies with ZigBee's HA1.2 (Home Automation)
standard. The DWS communicates with the Aqara multi-functional gateway.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm
between the radiator & your body.
Parameter
Product Model: MCCGQ11LM
Product Size: 41x22x11mm
Battery Type: CR1632
Detect Range :~22 mm
Operation Temperature:- 10℃-+ 50℃
1

Advertisement

loading

Summary of Contents for Aqara MCCGQ11LM

  • Page 1 The Door and Window Sensor User’s Manual Introduce Aqara’s Door/Window Sensor (DWS) is a smart device featuring low power consumption, small size, and cost-efficiency, utilizing the ZigBee© wireless protocol. It is powered by a CR1632 battery, and complies with ZigBee’s HA1.2 (Home Automation) standard.
  • Page 2 Operation Humidity: 0-95% RH,No Condensation Execution standard: Q/QLML003-2015 Installation Method: Effective distance validation: Click the reset button on the OS sensor in selected sensor installation location, it will be effective communication between device and gateway if the gateway to prompt. Step 1: Tear off glue stick protective film Step 2: Please align install tags Step 3: Paste respectively on the door or window (advice body fixed installed in opening...
  • Page 3 Button Function and LED light indication Function State Operation Join network If the DWS is not joined with the network: Press and hold the Press and Hold the reset button for 3 reset button seconds then the DWS initiates a request to seconds join the network.