Changing Print Positions - Kodak i4 50 Series User Manual

Changing print
positions
48
The horizontal print position must be changed manually.
1. Remove the output tray.
2. Open the printer access cover.
NOTES:
• The horizontal print positions are visible by a small detent on the printer
rail.
• Printing automatically stops approximately 1.27 cm (½-inch) from the
trailing edge of the document, even if the information has not been
completely printed.
3. Lift up on the printer carrier and remove it from it's position.
4. Align the slot on the printer carrier with the desired horizontal print position
and slide the printer carrier in place.
NOTE: The print location indicators at the edge of the input elevator can
be used as a guide to verify your horizontal print position.
5. Close the printer access cover and reinstall the output tray.
Print location
indicators
A-61837 September 2016