Kodak i4 50 Series User Manual page 32

26
1. Select Print Test. The Print Test screen will be displayed.
2. Place a blank sheet of paper in the input elevator.
3. Press the Start/Pause button. The document in the output tray will display
the results of the print test.
4. Remove the document from the output tray and evaluate the appearance
of the test pattern.
• If the pattern is complete, you are ready to begin.
• If the pattern is inconsistent, verify that the ink cartridge is installed
properly, or you may need to clean the print head on the bottom of the
ink cartridge or change the ink cartridge.
Acceptable
NOTE: Clean the print head by removing it from the printer carrier and
dabbing the print head with a damp cloth. For procedures on
removing or changing the ink cartridge, see Chapter 4, Document
Printing.
5. Press Stop to return to the Diagnostics screen.
Unacceptable: inconsistent pattern
A-61837 September 2016