Table of Contents
Advertisement
AXIS P37-PLE Panoramic camera series
Get started
Get started
Find the device on the network
To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both
applications are free and can be downloaded from axis.com/support.
For more information about how to find and assign IP addresses, go to How to assign an IP address and access your device.
Browser support
You can use the device with the following browsers:
®
Windows
®
macOS
®
Linux
Other operating systems
*To use AXIS OS web interface with iOS 15 or iPadOS 15, go to Settings
NSURLSession Websocket.
If you need more information about recommended browsers, go to AXIS OS Portal.
Open the device's web interface
1. Open a browser and type the IP address or host name of the Axis device.
If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.
2. Type the username and password. If you access the device for the first time, you must create an administrator account. See
Create an administrator account on page 4 .
Verify that no one has tampered with the firmware
To make sure that the device has its original Axis firmware, or to take full control of the device after a security attack:
1. Reset to factory default settings. See Reset to factory default settings on page 56.
After the reset, secure boot guarantees the state of the device.
2. Configure and install the device.
Create an administrator account
The first time you log in to your device, you must create an administrator account.
1. Enter a username.
2. Enter a password. See Secure passwords on page 5 .
3. Re-enter the password.
4. Click Add user.
TM
Chrome
Firefox
recommended
recommended
recommended
recommended
recommended
recommended
®
TM
Edge
Settings > > > Safari
Safari > > > Advanced
Advanced > > > Experimental
Settings
Safari
Advanced
4
®
Safari
*
Experimental Features
Features and disable
Experimental
Features
Advertisement
Table of Contents
