Table of Contents
Advertisement
AXIS P37-PLE Panoramic camera series
The web interface
Save: Click to save the OpenID values.
Enable OpenID: Turn on to close current connection and allow device authentication from the provider URL.
Events
Rules
A rule defines the conditions that triggers the product to perform an action. The list shows all the currently configured rules in
the product.
Note
You can create up to 256 action rules.
Add a rule: Create a rule.
Name: Enter a name for the rule.
Wait between actions: Enter the minimum time (hh:mm:ss) that must pass between rule activations. It is useful if the rule is
activated by, for example, day-night mode conditions, to avoid that small light changes during sunrise and sunset activate
the rule repeatedly.
Condition: Select a condition from the list. A condition must be met for the device to perform an action. If multiple
conditions are defined, all of them must be met to trigger the action. For information about specific conditions, see
Get started with rules for events.
Use this condition as a trigger: Select to make this first condition function only as a starting trigger. It means that once the rule
is activated, it remains active for as long as all the other conditions are met, no matter the state of the first condition. If you don't
select this option, the rule will simply be active whenever all the conditions are met.
Invert this condition: Select if you want the condition to be the opposite of your selection.
Add a condition: Click to add an additional condition.
Action: Select an action from the list and enter its required information. For information about specific actions, see
Get started with rules for events.
Recipients
You can set up your device to notify recipients about events or send files. The list shows all the recipients currently configured in the
product, along with information about their configuration.
Note
You can create up to 20 recipients.
36
Advertisement
Table of Contents
