Table of Contents
Advertisement
AXIS P37-PLE Panoramic camera series
The web interface
Note
We recommend you synchronize the device's date and time with an NTP server.
Synchronization: Select an option for the device's date and time synchronization.
• Automatic date and time (manual NTS KE servers): Synchronize with the secure NTP key establishment servers
connected to the DHCP server.
-
• Automatic date and time (NTP servers using DHCP): Synchronize with the NTP servers connected to the DHCP server.
-
• Automatic date and time (manual NTP servers): Synchronize with NTP servers of your choice.
-
• Custom date and time: Manually set the date and time. Click Get from system to fetch the date and time settings
once from your computer or mobile device.
Time zone: Select which time zone to use. Time will automatically adjust to daylight saving time and standard time.
Note
The system uses the date and time settings in all recordings, logs, and system settings.
Network
IPv4
Assign IPv4 automatically: Select to let the network router assign an IP address to the device automatically. We recommend
automatic IP (DHCP) for most networks.
IP address: Enter a unique IP address for the device. Static IP addresses can be assigned at random within isolated networks,
provided that each address is unique. To avoid conflicts, we recommend you contact your network administrator before you
assign a static IP address.
Subnet mask: Enter the subnet mask to define what addresses are inside the local area network. Any address outside the local
area network goes through the router.
Router: Enter the IP address of the default router (gateway) used to connect devices that are attached to different networks and
network segments.
Fallback to static IP address if DHCP isn't available: Select if you want to add a static IP address to use as fallback if DHCP
is unavailable and can't assign an IP address automatically.
Note
If DHCP isn't available and the device uses a static address fallback, the static address is configured with a limited scope.
IPv6
Assign IPv6 automatically: Select to turn on IPv6 and to let the network router assign an IP address to the device automatically.
Hostname
Assign hostname automatically: Select to let the network router assign a hostname to the device automatically.
Hostname: Enter the hostname manually to use as an alternative way of accessing the device. The server report and system log
use the hostname. Allowed characters are A–Z, a–z, 0–9 and -.
DNS servers
Manual NTS KE servers: Enter the IP address of one or two NTP servers. When you use two NTP servers,
the device synchronizes and adapts its time based on input from both.
Fallback NTP servers: Enter the IP address of one or two fallback servers.
Manual NTP servers: Enter the IP address of one or two NTP servers. When you use two NTP servers, the
device synchronizes and adapts its time based on input from both.
30
Advertisement
Table of Contents
