Table of Contents
Advertisement
AXIS Q60 Series
Get started
Get started
Find the device on the network
To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both
applications are free and can be downloaded from axis.com/support.
For more information about how to find and assign IP addresses, go to How to assign an IP address and access your device.
Browser support
You can use the device with the following browsers:
®
Windows
®
macOS
®
Linux
Other operating systems
*To use AXIS OS web interface with iOS 15 or iPadOS 15, go to Settings
NSURLSession Websocket.
If you need more information about recommended browsers, go to AXIS OS Portal.
Open the device's webpage
1. Open a browser and enter the IP address or host name of the Axis device.
If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network.
2. Enter the username and password. If you access the device for the first time, you must set the root password. See Set a
new password for the root account on page 3 .
Verify that no one has tampered with the firmware
To make sure that the device has its original Axis firmware, or to take full control of the device after a security attack:
1. Reset to factory default settings. See Reset to factory default settings on page 22.
After the reset, secure boot guarantees the state of the device.
2. Configure and install the device.
Set a new password for the root account
The default administrator username is root. There's no default password for the root account. You set a password the first
time you log in to the device.
1. Type a password. Follow the instructions about secure passwords. See Secure passwords on page 4 .
2. Retype the password to confirm the spelling.
3. Click Add user.
Important
If you lose the password for the root account, go to Reset to factory default settings on page 22 and follow the instructions.
TM
Chrome
Firefox
recommended
recommended
recommended
recommended
recommended
recommended
®
TM
Edge
Settings > > > Safari
Settings
Safari > > > Advanced
Safari
Advanced > > > Experimental
Advanced
3
®
Safari
*
Experimental Features
Experimental
Features and disable
Features
Advertisement
Table of Contents
