Storage; How Do I Replace The Shaving Heads - Philips S9985/50 Manual

Storage

How do I replace the shaving heads?

Replacing the shaving heads
3 Pour any remaining fluid down a drain and recycle the
empty cartridge in accordance with local waste
regulations.
4 Place a new Quick Clean Pod Cartridge into the Quick
Clean Pod (see 'Preparing the Quick Clean Pod for
use').
Scan the QR code to the left or visit
www.philips.com/cleaning-cartridge to order
replacement Quick Clean Pod Cartridges.
Note: We advise you to let the appliance and its
attachments dry before you store them for the next use.
- Store the appliance in the pouch (if supplied).
- Put the protection cap (if supplied) on the shaver to
protect it from dirt accumulation.
- Alternatively, store the appliance on the charging
stand (if supplied) or in the Philips Quick Clean Pod (if
supplied).
For maximum shaving performance, we advise you to
replace the shaving heads every two years.
Replace damaged shaving heads immediately. Always
replace the shaving heads with original Philips shaving
heads (see 'Ordering accessories').
1 Switch off the shaver.
2 Press the release button on the shaving unit and pull
the shaving head holder off the shaving unit.
45
English