• Fasten it �rmly into position and check the wall plugs are not loose to ensure that the electric
heater is �rmly mounted.
• Connect the water heater intake and outlet with pipes or accessories that are able to withstand
temperatures over 100°C at a pressure that exceeds working pressure (8 bar) . Therefore, we
strongly recommend that no materials should be used that cannot withstand high temperatures.
• When �tting the water pipes follow the basic rules to prevent corrosion: "Do not use copper
before iron or steel in the direction of the water �ow". To prevent galvanic pairs and their
destructive effect, use Te�on tape to thread the insulating hoses supplied with the heater to its
two pipes.
Ants to supply hot water in multiple places, please refer to (Figure4) for pipeline connection and
installation.
06
Wall
Expansion bolt
Hook