Table of Contents
Advertisement
DHCP
Figure 11.
DHCP Server: Enabling DHCP server allows the 85Mbps Powerline Wireless Access Point to
automatically assign IP addresses to devices connecting to the LAN. DHCP is disabled by
default.
DHCP Server Start IP: Enter an IP address to serve as the starting IP address that the DHCP
server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline
Wireless Access Point.
DHCP Server End IP: Enter an IP address to serve as the ending IP address that the DHCP
server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline
Wireless Access Point.
Lease Time: The lease time specifies the amount of time a network user is allowed for their
current dynamic IP address.
Dynamic DHCP List: All dynamic DHCP client computers are listed in the table. The
following information is shown for each DHCP client computer: Host name, IP address, MAC
address and Expired Time.
11
Advertisement
Table of Contents
