H&S 5234 Operator's Manual page 30

ADJUSTMENTS
FRONT & REAR AUGER SLIDES
The front and rear auger slide assemblies are retained by adjustment
plates with diagonal slots. To adjust, loosen retaining hardware and
drive the plates downward with a hammer until the slide assembly is
snug against the tank, then retighten the retaining hardware. Grease
the slide assembly to ensure a leak-free seal.
DISCHARGE GATE
The discharge gate is retained by adjustable
angles that secure the gate to the tank
through diagonal slots. To adjust, loosen
retaining hardware and drive the angles
downward with a hammer until the discharge
gate is snug against the tank, then retighten
the retaining hardware. Grease the discharge
gate to ensure a leak-free seal.
-28-