Advertisement
TECHNICAL DATA
Rated input
Rated current
Rated power
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Width of cut
Blade teeth
Max. cutting capacity
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
Min. workpiece dimensions
Weight according EPTA-Procedure 01/2014
Measured sound values determined according to EN 62841:
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
WARNING! The declared noise emission value(s) have been measured in accordance with a standard test method of EN 62841-1 and EN
62841-3-9, and may be used for comparing one tool with another. The declared noise value(s) may also be used in a preliminary assessment
of exposure.
The noise emissions during actual use of the power tool can differ from the declared values depending on the ways in which the tool is used
especially what kind of workpiece is processed. Identify safety measures to protect the operator based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time).
Wear hearing protection. Exposure to noise can cause hearing loss.
REPLACEMENT PARTS
Saw blade
Kerf plate
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
MITRE SAW
089100163001
089100141126
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock.
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
25
PS216SB2
220V - 240V ~ 50 Hz
6.5 A
1400 W
-1
5000 min
216 x 30 mm
1.6 mm
2.4 mm
40
65 x 305 mm
65 x 215 mm
36 x 305 mm
36 x 215 mm
130 x 35 x 2.5 mm
16.2 kg
98.45 dB (A)
3 dB (A)
111.45 dB (A)
3 dB (A)
25
Advertisement
