Table of Contents
Advertisement
Available languages
Available languages
TECHNICAL DATA
Production code.....................................................................
Rated speed ..........................................................................
D=Cutting disk diameter max. ..........................
d=hole diameter ................................................
b=Cutting disk thickness min. / max. ................
Cutting depth max. ................................................................
Battery voltage.......................................................................
Weight according EPTA-Procedure 01/2014 (2.0...6.0 Ah) ...
Recommended ambient operating temperature ....................
Recommended battery types.................................................
Recommended charger .........................................................
Noise/vibration information (cutting concrete)
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound power level (Uncertainty K=3dB(A)) ........................
Sound pressure level (Uncertainty K=3dB(A))....................
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
Uncertainty K ......................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and specifi cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
CUT-OFF MACHINE SAFETY WARNINGS
a) The guard provided with the tool must be securely
attached to the power tool and positioned for maxi-
mum safety, so the least amount of wheel is exposed
towards the operator. Position yourself and bystanders
away from the plane of the rotating wheel. The guard
helps to protect operator from broken wheel fragments and
accidental contact with wheel.
b) Use only bonded reinforced or diamond cut-off
wheels for your power tool. Just because an accessory
can be attached to your power tool, it does not assure safe
operation.
c) The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed can
break and fl y apart.
d) Wheels must be used only for recommended
applications. For example: do not grind with the side
of cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these wheels
may cause them to shatter.
e) Always use undamaged wheel fl anges that are of
correct diameter for your selected wheel. Proper wheel
fl anges support the wheel thus reducing the possibility of
wheel breakage.
20
ENGLISH
470 349 - BMMS18SBL.indd 20
470 349 - BMMS18SBL.indd 20
CUT-OFF MACHINE
.............................................
h,SG
BMMS18SBL
BMMS18SBL
....................................... 4774 12 01...
....................................... 4774 12 01...
...000001-999999
...000001-999999
........................................ 20000 min
........................................ 20000 min
.............................................. 76 mm
.............................................. 76 mm
.............................................. 10 mm
.............................................. 10 mm
................................. 1 mm / 2,8 mm
................................. 1 mm / 2.8 mm
........................................... 16.3 mm
........................................... 16,3 mm
.............................................. 18 V
.............................................. 18 V
..................................... 1.2...1.7 kg
..................................... 1,2...1,7 kg
........................................ -18...+50 °C
........................................ -18...+50 °C
L1860R, L1850R, L1840R, L1830R, L1825R, L1820R, L1815R, L1820S
L1860R, L1850R, L1840R, L1830R, L1825R, L1820R, L1815R, L1820S
.................... BL1218, BLK1218; AL1218G; AL18G
.................... BL1218, BLK1218; AL1218G; AL18G
......................................... 102,0 dB (A)
......................................... 102.0 dB (A)
........................................... 91.0 dB (A)
........................................... 91,0 dB (A)
............................................. 4.2 m/s
............................................. 4,2 m/s
............................................. 1.5 m/s
............................................. 1,5 m/s
f) Do not use worn down reinforced wheels from
larger power tools. Wheels intended for a larger power
tool are not suitable for the higher speed of a smaller tool
and may burst.
g) The outside diameter and the thickness of your
accessory must be within the capacity rating of your
power tool. Incorrectly sized accessories cannot be ade-
quately guarded or controlled.
h) The arbour size of wheels and fl anges must properly
fi t the spindle of the power tool. Wheels and fl anges with
arbour holes that do not match the mounting hardware of
the power tool will run out of balance, vibrate excessively
and may cause loss of control.
i) Do not use damaged wheels. Before each use,
inspect the wheels for chips and cracks. If power tool
or wheel is dropped, inspect for damage or install an
undamaged wheel. After inspecting and installing the
wheel, position yourself and bystanders away from
the plane of the rotating wheel and run the power tool
at maximum no load speed for one minute. Damaged
wheels will normally break apart during this test time.
j) Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and shop apron capable of stopping
small abrasive or workpiece fragments. The eye protec-
tion must be capable of stopping fl ying debris generated
by various operations. The dust mask or respirator must be
capable of fi ltrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause
hearing loss.
-1
-1
2
2
2
2
02.09.2020 17:53:21
02.09.2020 17:53:21
Advertisement
Table of Contents
