REVV Generator 100P MK3 Owner's Manual page 18

R E V V | G E N E R A T O R 1 0 0 P M K 3
a CC number & then designate whether it be turned to
on or off. (Consult the external equipment instruction
manual).
The following commands & their CC numbers need
only be sent an ON command (0-63) as they are used
to switch between channels & aggression levels which
cannot be turned off, only changed to a different channel
or level, on & off commands sent will produce the same
result.The following 2 commands will switch to the
channel & then toggle through the aggression levels
with each use of the command using the footswitch to
switch to the channel & toggle through the aggression
levels. This command will also respond to an on & off
command with the same result:
Function
Ch. 1
Ch. 1 wide
Ch. 2 low Drive
Ch. 2 med Drive
Ch. 2 high Drive
Ch. 3 low aggression
Ch. 3 med aggression
Ch. 3 high aggression
The following command will switch to the channel &
then toggle through the aggression levels with each
use of the command like using the footswitch to
switch to the channel & toggle through the aggression
levels. This command will also respond to an on & off
command with the same result:
Ch. 3+ aggression toggle 24 – (0x18)
18
CC Number Hex value)
13 - (0x0D)
14 - (0x0E)
15 - (0x0F)
16 - (0x10)
17 - (0x11)
18 - (0x12)
19 - (0x13)
20 - (0x14)
The following commands control functions that are
turned on & off. These functions require an off (0-63)
& on (64-127) command (byte) to be sent with the CC
number to either turn them on or off.
If you are trying to use them & are not getting them
to respond, chances are you are sending the wrong
command byte ( 0-63 is OFF & 64-127 is ON).
(Consult the Peripheral's instruction manual)
Function
Noise Gate
Masters
Fat
Bright
Mute
Reverb
Pre-Post
Cut
FX Loop
Two Notes Power Amp
Two Notes Reverb
Two Notes Noise Gate
Two Notes Twin Tracker
Two Notes EQ
Two Notes EQ R
Two Notes Mute
CC Number Hex value)
26 – (0x1A)
27 – (0x1B)
28 – (0x1C)
29 – (0x1D)
30 – (0x1E)
31 – (0x1F)
33 – (0x21)
34 – (0x22)
35 – (0x23)
36 – (0x24)
37 – (0x25)
38 – (0x26)
39 – (0x27)
40 – (0x28)
41 – (0x29)
42 – (0x2A)