Table of Contents
Advertisement
WELCOME
Congratulations & welcome to the Revv family! Thank you for trusting Revv Amplification with
such an important part of your musical endeavors. Enjoy tone, durability, & ease of use
designed to inspire.
This is an addendum to the D20 manual designed to get you up & running with your G20
quickly. All technical information (such as bias instruction) can be found in the D20 manual &
you will find extra information here primarily relating to 2 areas:
1) High Gain & Channel Switching Features
2) MIDI & Virtual Cabinet Controls
Please refer to the D20 manual on this website for all s afety info
Please refer to the D20 manual on this website for all warranty & compliance info
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for REVV G20
Summary of Contents for REVV G20
- Page 1 Enjoy tone, durability, & ease of use designed to inspire. This is an addendum to the D20 manual designed to get you up & running with your G20 quickly. All technical information (such as bias instruction) can be found in the D20 manual &...
- Page 2 Controls Gain Knob - T his knob only controls the amount of gain on Channel 2. The G20 is designed to be usable throughout the full range of this knob & its position also alters frequency response, particularly in the low end & mids. Be sure to experiment! Wide Switch -...
- Page 3 Aggression LED flashes RED, the cab save feature is enabled. Amp Startup Settings By default, G20 will power up with Channel 1 loaded & all options turned off. However, any combination of channels, Aggression settings & functions can be saved so that the amplifier will always power up with your favorite settings.
- Page 4 MIDI Versatile & optional MIDI control helps Revv amps seamlessly integrate into any rig. The amplifier will store up to 128 programs for Program Change commands as well as accept Continuous Controller (CC) commands to control functions directly. The amplifier also features OMNI mode to allow control options on 16 channels, &...
- Page 5 Note: The channel LED will flash blue when it turns OMNI mode ON, & RED when it turns OMNI mode off. MIDI Channel Setting This amplifier can either automatically or manually change the 16 MIDI channels you would like it to respond to. The channel change is stored in memory & only needs to be done when you need the amp to respond on a certain channel.
- Page 6 MIDI Programs & Virtual Cabinets One thing to keep in mind is that whenever you use a Program patch number, the G20 will also recall the Virtual Cabinet that is saved in the Two notes Torpedo & associated with that number.
- Page 7 CC Commands In order to use CC commands, the Generator functions have all been given a designated number & on or off setting. When using & selecting a function the number associated with the function must be used & then the setting of the function (on or off) must also be sent. Most MIDI equipment (pedals etc) allows you to select a CC number &...
Need help?
Do you have a question about the G20 and is the answer not in the manual?
Questions and answers