Timer Functions; Launching The Timer Menu; Timer; Stopwatch - Gaggenau BO 451 6 Series Use And Care Manual

Timer functions

In the timer menu, set:
Š

Timer

p

Stopwatch

6
Cooking time (not in the idle state)
5
Cooking time end (not in the idle state)

Launching the timer menu

You can launch the timer menu from any mode. Only
from the factory settings, program selection is set to
the time menu is not available.
M
Touch the symbol.
The timer menu appears.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1 Call up the Timer menu.
The "Timer" function
2 Turn the rotary selector to set the desired time.
16
Š
is displayed.
I
3 Start with
The Timer menu closes and the timer starts to run. The
symbol for the timer
time can be seen counting down.
A signal sounds once the time has elapsed. The audible
S ,
signal ceases if you touch the
You can exit the Timer menu at any time by touching the
'
symbol. This way, the settings are lost.
Suspend timer:
Call up the Timer menu. Select the "Timer" function with
C Š
, select , and touch the
run on, touch the
Switch off the timer early:
Call up the Timer menu. Select the "Timer" function with
C Š
, select , and touch the
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts up from 0 seconds to 90 minutes.
It has a pause function. Therefore, you can stop the
timer in between times.
Starting the stopwatch
1 Launch the timer menu.
C
2 With , select the "Stopwatch" function
.
Š
appears on the display and the
™
symbol.
H
symbol. To let the timer
I
symbol.
Ž
symbol.
p
.