Maintenance; Cleaning The Filter; Emptying The Dust Bin - Shark ION RV700 NC Series Owner's Manual

MAINTENANCE

CAUTION: Turn off power before performing any maintenance.

EMPTYING THE DUST BIN

EMPTY DUST BIN AFTER EACH USE.
Press the dust bin removal button and slide out the
dust bin.
Empty debris and dust into trash.
s h a r kc l e a n . c o m
To open the dust bin lid, press and hold the button
while lifting the lid, using the finger slots.
MAINTENANCE

CLEANING THE FILTER

CLEAN FILTER EVERY WEEK.
REPLACE FILTER EVERY TWO MONTHS. See sharkaccessories.com for replacement filters.
Remove and empty the dust bin. Clean any hair or
debris off the Anti-Tangle Comb on the back of
the dust bin.
Lightly tap the filter to remove dust and debris.
Rinse filter with water only, and let air-dry 24 hours
before reinstalling.
Pull filter out of the dust bin with the tabs indicated.
Reinsert the filter into the dust bin. Slide the dust
bin back into the robot.
s h a r kc l e a n . c o m