IMPORTANT SAFETY INSTRUCTIONS 18. DO NOT use to pick up: 25. Use ONLY the Shark® charging dock a) Liquids XSKRVDOCK and use only battery PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY b) Large objects RVBAT850. Use of batteries or battery...
Page 3
ABOUT THE SHARK ION™ ROBOT ABOUT THE SHARK ION™ ROBOT With Auto-Sense™ Navigation, your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and Charge Indicator Lights it may not cover every area in a single cleaning.
INSTALLING THE SIDE BRUSHES CHARGING Snap the 2 included Side Brushes onto the square IMPORTANT: The Shark ION Robot has a pre-installed rechargeable battery. Battery must be fully charged posts on the bottom of the robot. before using. To charge, the Power button on the side of the robot...
CHARGING THE SHARK ION™ ROBOT USING THE SHARK ION™ ROBOT BUTTONS AND INDICATOR LIGHTS Flashing Red CHARGE INDICATOR LIGHTS Critically Low CLEAN BUTTON Press to begin a cleaning In Use session. Press again to stop. Full Charge Nearly Full Mid Charge...
Page 6
“Alexa, tell Shark to start cleaning.” “OK Google, tell Shark to pause my robot.” “Alexa, tell Shark to pause my robot.” “ OK Google, tell Shark to send my robot to “ Alexa, tell Shark to send my robot to the dock.”...
USING THE SHARK ION™ ROBOT MAINTENANCE BotBoundary® strips CAUTION: Turn off power before performing any maintenance. To keep your robot away from certain areas, such as pet bowls, fragile objects, power strips, or doorways, use the BotBoundary strips to quickly and easily create “no-go zones”.
MAINTENANCE MAINTENANCE CLEANING THE FILTER CLEANING THE MULTI-SURFACE BRUSHROLL CLEAN FILTER EVERY WEEK. THE BRUSHROLL NEEDS OCCASIONAL MAINTENANCE. REPLACE FILTER EVERY TWO MONTHS. See sharkaccessories.com for replacement filters. REPLACE BRUSHROLL EVERY 6 to 12 MONTHS, OR WHEN VISIBLY WORN. See sharkaccessories.com for replacement parts.
MAINTENANCE MAINTENANCE CLEANING SENSORS AND CHARGING PADS CLEANING THE WHEELS CLEAN SENSORS AND CHARGING PADS PERIODICALLY AS NEEDED. With a dry cloth or cleaning brush, gently dust off REMOVE AND CLEAN FRONT WHEEL EVERY WEEK. REPLACE FRONT WHEEL EVERY 12 MONTHS. the sensors and pads located on the bottom of the robot.
MAINTENANCE MAINTENANCE REPLACING THE BATTERY TROUBLESHOOTING If any error lights are illuminated or flashing on your Shark ION™ Robot, see the error code chart below: ERROR CODE SOLUTION The robot is in Sleep Mode, the power switch is turned off (O) or there is no charge remaining.
END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY 5.6 You will not use the Ayla Application Libraries or Ayla Embedded Software to attempt to gain BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating unauthorized access to or use of the systems/services of SharkNinja’s other licensors;...
You must call 1-888-228-5531 to initiate a warranty claim. Before calling to file a claim register your product on www.registeryourshark.com. To better assist you please have your Shark with you at the time of the call. You will need the receipt as proof of purchase. A Customer Service Specialist will provide you with return and packing instruction information.