DO NOT use as an attachment to carry the appliance with your finger on Before each use, carefully inspect all 11. Only use Shark® branded filters and power tools for GUIDE parts for any damage. If a part is damaged, accessories.
Page 3
ABOUT THE SHARK ION ROBOT ABOUT THE SHARK ION ROBOT With Auto-Sense Navigation, your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and Charge Indicator Lights it may not cover every area in a single cleaning.
Page 4
CHARGING Snap the 2 included Side Brushes onto the square IMPORTANT: The Shark Robot has a pre-installed rechargeable battery. Battery must be fully charged before using. posts on the bottom of the robot. When the cleaning cycle is complete, or if the battery To charge, the Power button on the side of the robot is running low, the robot will search for the dock.
Page 5
CHARGING THE SHARK ION ROBOT USING THE SHARK ION ROBOT BUTTONS AND INDICATOR LIGHTS CHARGE INDICATOR LIGHTS CLEAN BUTTON Press to begin a cleaning In Use session. Press again to stop. Clean Full Charge Nearly Full Mid Charge Low Charge...
Page 6
Min. SETTING UP THE SHARK CLEAN APP Download the latest version of the Shark Clean app from the App Store or Google Play Store. Follow instructions as on the app to connect to the robot. To ensure you successfully pair with the robot: For your robot’s cliff sensors to work properly,...
MAINTENANCE MAINTENANCE CLEANING THE FILTER CLEAN FILTER EVERY WEEK. CAUTION: Turn off power before performing any maintenance. REPLACE FILTER EVERY TWO MONTHS. See sharkaccessories.com for replacement filters. EMPTYING THE DUST BIN EMPTY DUST BIN AFTER EACH USE. Remove and empty the dust bin. Clean any hair or Pull filter out of the dust bin by the tabs.
MAINTENANCE MAINTENANCE CLEANING THE MULTI-SURFACE BRUSHROLL CLEANING SENSORS AND CHARGING PADS CLEAN SENSORS AND CHARGING PADS PERIODICALLY AS NEEDED. With a dry cloth or cleaning brush, gently dust off THE BRUSHROLL NEEDS OCCASIONAL MAINTENANCE. the sensors and pads located on the bottom of the robot. REPLACE BRUSHROLL EVERY 6 to 12 MONTHS, OR WHEN VISIBLY WORN.
MAINTENANCE MAINTENANCE CLEANING THE WHEELS REPLACING THE BATTERY REMOVE AND CLEAN FRONT WHEEL EVERY WEEK. REPLACE FRONT WHEEL EVERY 12 MONTHS. See sharkaccessories.com for replacement parts. Unplug the old battery from its connector, then To remove the battery, turn the unit over and plug in the new battery.
BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating LLC’s (“SharkNinja”) End-User License Agreement (“EULA”) is a legal agreement between You (either If any error lights are illuminated or flashing on your Shark ION Robot, see the error code a single entity or an individual) and SharkNinja for SharkNinja’s Software Applications, including those...
To better assist you please have your Shark with you at the time of your call. and for any other pecuniary or other loss whatsoever) arising out of or in any way related to the use of or inability to use SN Devices or SN APPS, the provision of or failure to provide support or other services, A Customer Service Specialist will provide you with return and packing instruction information.
Page 12
PLEASE READ CAREFULLY AND KEEP FOR FUTURE for help. REFERENCE. This Owner's Guide is designed to help you keep your Shark ION Robot running at peak performance. BATTERY REMOVAL AND DISPOSAL This product uses a battery. When the battery no longer holds a charge, it should be removed from the vacuum and recycled.
Need help?
Do you have a question about the ION RV760 Series and is the answer not in the manual?
Questions and answers