IMPORTANT SAFETY INSTRUCTIONS 18. DO NOT use to pick up: 25. Use ONLY the Shark® charging docks a) Liquids RVDOK850 or RVDOK85OWV and use PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY b) Large objects only battery RVBAT850. Use of batteries...
Page 3
Charging Dock. It may be helpful to BotBoundary strips. block off part of your home with BotBoundary strips, or to add a second dock (available at shark- accessories.com) s h a r kc l e a n . c o m...
Page 4
INSTALLING THE SIDE BRUSHES CHARGING Snap the 2 included Side Brushes onto the square IMPORTANT: The Shark ION Robot has a pre-installed rechargeable battery. Battery must be fully charged pegs on the bottom of the robot. before using. To charge, the Power button on the side of the robot...
Page 5
CHARGING THE SHARK ION™ ROBOT USING THE SHARK ION™ ROBOT BUTTONS AND INDICATOR LIGHTS CHARGE INDICATOR LIGHTS CLEAN BUTTON Press to begin a long-running In Use cleaning session. Press again to stop. Clean Full Charge Nearly Full Mid Charge Low Charge...
UP arrow on the remote With the remote control, you can start and stop Shark ION Robot, select Max Cleaning for two full seconds, until the Signal icon appears. Your robot will beep and display the Schedule icon. Make mode, send the unit back to the charging dock, and program a cleaning schedule for sure the remote is pointed directly at your robot.
USING THE SHARK ION™ ROBOT MAINTENANCE BotBoundary™ strips CAUTION: Turn off power before performing any maintenance. To keep your robot away from certain areas, such as pet bowls, fragile objects, power strips, or doorways, use the BotBoundary strips to quickly and easily create “no-go zones”.
MAINTENANCE MAINTENANCE CLEANING THE FILTER CLEANING THE BRUSHROLL CLEAN FILTER EVERY WEEK. CLEAN BRUSHROLL EVERY WEEK. REPLACE FILTER EVERY TWO MONTHS. See sharkaccessories.com for replacement filters. REPLACE BRUSHROLL EVERY 6 to 12 MONTHS, OR WHEN VISIBLY WORN. See sharkaccessories.com for replacement parts.
MAINTENANCE MAINTENANCE CLEANING SENSORS AND CHARGING PADS CLEANING THE WHEELS CLEAN SENSORS AND CHARGING PADS PERIODICALLY AS NEEDED. With a dry cloth or cleaning brush, gently dust off REMOVE AND CLEAN FRONT WHEEL EVERY WEEK. REPLACE FRONT WHEEL EVERY 12 MONTHS. the sensors and pads located on the bottom of the robot.
MAINTENANCE MAINTENANCE REPLACING THE BATTERY TROUBLESHOOTING If any error lights are illuminated or flashing on your Shark ION™ Robot, see the error code chart below: ERROR CODE SOLUTION Power may be turned off or battery may need charging. Turn power ALL LED LIGHTS are off switch to On position.
Page 11
NOTES ONE (1) YEAR LIMITED WARRANTY The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following...
Page 12
NOTES NOTES s h a r kc l e a n . c o m s h a r kc l e a n . c o m...
Need help?
Do you have a question about the ION RV700_N Series and is the answer not in the manual?
Questions and answers
Can the rv-700n be connected or programmed in my iPhone
Yes, the Shark RV700_N Series can be connected or programmed with an iPhone, as it is compatible with the Apple App Store.
This answer is automatically generated