Hardware Installation - TRENDnet TFC-1000 Quick Installation Manual

3. Hardware Installation

Installing Two Stand Alone Fiber Converters
1. Connect the fiber cable to
the Fiber Converters.
2. Connect an RJ-45 Ethernet
cable from the Ethernet port
on the fiber converters to an
Ethernet port on your switch
(e.g TE100-S24R or
TEG-S240TX).
3. Connect the power adapter
to the back of the fiber
converter.
Note:
– Cabling:
Multi-Mode Optic Cable: TFC-210MST, TFC-210MSC, TFC-2000MSC
Single-Mode Optic Cable: TFC-210S30, TFC-210S50, TFC-2000S30,
TFC-2000S50
Single Strand Optic Cable for TFC-210S20D3/D5, TFC-210S10D3/D5
– The TX and RX cables must be reversed on the opposing Fiber
connection.
– The TFC-210S20D3 must be paired with the TFC-210S20D5. The
TFC-2000S10D3 must be paired with the TFC-2000S10D5.
– The TX and FX ports on the TFC-2000 series do not support auto
negotiation. The opposing Copper and Fiber connection must be
Gigabit.
3
English