Inserting And Removing An Electronic Module; Inserting An Electronic Module - Pilz PSS u2 EF 8DO 0.5A Operating Manual

Installation
6.2

Inserting and removing an electronic module

Please note:
}
Backplane must be installed first.
}
Electronic modules may only be plugged or unplugged if the terminal block has been re-
moved first.
}
The mechanics of the electronic modules are designed for 20 plug in/out cycles.
}
On electronic modules with outputs, the terminal block may only be inserted and removed
when the load is switched off. Unforeseeable error reactions may be triggered if modules
are inserted and removed under load.
6.2.1

Inserting an electronic module

1. Insert the electronic
module into the suspen-
sion lug on the back-
plane.
Operating Manual PSS u2 EF 8DO 0.5A
1003621-EN-03
| 18