What To Do If Your Appliance Does Not Work - Krups FRESHBOOST KB180111 Manual

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK

PROBLEMS
The appliance does
not work.
Excessive vibration.
Leak from the bottle
The blade does not
rotate easily.
Is your appliance still not working?
Contact customer service (see contact details in the separate booklet).
CAUSE
It is not plugged in.
The bottle (B) is not
correctly assembled or
positioned on the motor
unit (A).
The appliance is not on
a flat, stable surface.
Volume of ingredients is
too high.
Error in assembling the
accessories.
Incorrect positioning of
the seal on the blade
unit (B1).
The blade unit (B1)
is insufficiently or
incorrectly locked on the
bottle (B2).
Pieces of food are too
big or too hard.
SOLUTIONS
Plug the appliance in using a plug with
the same voltage.
Check that the bottle is correctly
assembled; dismantle and assemble
again Fig.1 and Fig.2 and check that it
is far down enough on the motor unit.
Maintain pressure on the blender
bottle assembly (B) during operation
Fig.3.
Put the appliance on a flat stable
surface.
Reduce the quantity of ingredients
processed.
Check that the bottle (B2) is correctly
assembled with the blade unit (B1).
Make sure that the seal is correctly
positioned, the lips of the seal should
be visible and it should not be buckled
Handle the blade units (B1) with
care because the blades are sharp.
To ensure optimal effectiveness of
NutriKeep technology, never remove
the gasket from the blade holder. If
you remove it, you may damage the
gasket and impair the proper operation
of your appliance.
Make sure that the blade unit and the
bottle are fitted together correctly.
Reduce the size or quantity of the
ingredients processed.
Add liquid to the bottle without
exceeding the maximum level.
11