Cleaning Your Appliance; What To Do If Your Appliance Does Not Work - Krups Perfect Mix 9000 KB303 Manual

(A) if not the appliance will not operate (fig. 6).
„ „
Plug in the appliance. Keep your hand supporting the bowl (E4) or (F4) and during
operation press the button (B) or (C) several times or continuously (fig. 7).
„ „
To stop the appliance, release the button (B) or (C). Unplug the appliance.
„ „
Remove the accessory (E) or (F) from the motor unit (A), turn the accessory over on
the work surface and release the blade unit (E1) or (F1) by pressing on the "click"
button (E2) or (F2).
„ „
You can then take out your preparation.
„ „
Unplug the appliance and remove the bowl or accessories.
„ „
The blades and accessories are sharp, handle them with care.
„ „
To facilitate cleaning, the blade unit (D1) can be detached from the bowl (D4) by
pressing on the click button (D2) (fig. 8a, 8b, 8c).
„ „
The bowl (D) the accessories (E) and (F) can be washed in the top basket of the
dishwasher using the "ECO" or "LIGHT WASH" programme.
„ „
To clean the motor unit (A), use a damp cloth and dry it carefully. Never immerse the
motor unit (a) in water or any other liquid.

WHaT TO DO IF yOuR aPPlIaNCE DOES NOT WORK

PROBlEmS
The appliance does not
work.
10

ClEaNINg yOuR aPPlIaNCE

It is not plugged in.
The bowl
accessories (E) and (F) are
not correctly assembled or
positioned on the motor
unit (A).
CauSES
(D) or the
SOluTIONS
Plug the appliance
using a plug with the same
voltage.
Check that the bowl or
accessories are correctly
assembled; dismantle and
start to assemble again
(fig. 2a, 2b and 2c) and
check that they are far
down enough on the motor
unit.
Maintain pressure on the
accessory lid (E) or (F)
during operation.
in