Panasonic CZ-CFUSCC1 Installation Instructions Manual page 6

Simple Settings
Simple Settings (Static IP Address)
Confi rm the power is turned off .
1
Power Switch
Using the LAN cable, connect the PC for maintenance
2
directly to the cloud adaptor.
LAN cable
Cloud adaptor
3
Using the DIP switch, set the mode of the cloud adaptor
to the maintenance mode.
Do not change the setting of
switch 1 from the ON position.
Change the setting of switch 2 to ON position.
Turn the power on.
4
• Confi rm that the Orange LED (LED 17) is lighting, Green LED
(LED 16) is blinking at a slow speed, and the Green LED (LED
18) is lighting.
ON
Lighting
(Green)
Power Switch
 If the Orange LED (LED 17) does not light and the Green
LED (LED 16) does not blink at a slow speed.
Refer to the "Self-diagnostics table and detected contents". (P.14)
Start up the PC, and set if the network settings as
5
follows.
IP address
Subnet mask
Default gateway
6
(continued)
Off
LED
18
OFF
Recommended PC
specifi cations
• CPU: Core i5 2.0 GHz
• Memory: 4G
• OS: Windows 8.1/10
PC for maintenance
Maintenance mode
3
ON
OFF
1 2 3 4
Lighting
Off
(Orange)
Blinking
(Green)
LED LED
17 16
ON
192. 168. 1. 100
255. 255. 255. 0
192. 168. 1. 254
Enter the following URL in the Web browser, and
6
access the cloud adaptor. http://192. 168. 1. 1/
Recommended Web browser specifi cations
• Internet Explorer (IE) 11, Edge, Chrome
• The login screen appears.
 If the login screen does not appear
Check if the LAN port LED on the PC is blinking.
Not blinking
→Connect the LAN cable correctly.
Blinking
→ Check the settings in step 5.
Enter the user name and password.
7
The user name and password as factory default are shown below.
• user
• password : KYJN2015ca
8
Press
Note
• If you fail to login 10 consecutive times, login operation will be
disabled for 30 minutes.
• If no operation is performed for 30 minutes, the session will time
out. Press
Enter the current (old) password and new password
9
(twice).
LED
15 • Change the
password to
the one actually
used.
10
Press
 To cancel
Press
Select
11
11
: ca_user
.
to display the login screen.
10
.
.
in the [Settings Mode Selection] menu.
7 8
9