Table of Contents
Advertisement
Advanced Settings
Air Conditioner Setting
1
Press
.
When "Now initializing. Please wait." is displayed, wait for the A/C
unit list to be displayed.
2
Press
.
• Air conditioners connected to the cloud adaptor are detected, and
the A/C unit list is updated.
• The following message is displayed if abnormality is found on the
air conditioner.
Confi rm the message, and press [Close].
• Scan the A/C units again after fi xing the abnormality.
Message
Central address duplicate
Scan Time Out Error
Check if the connected indoor units are all displayed,
3
and confi rm that the number of the connected outdoor
units and the number of detected units correspond
with each other.
If some of the indoor units are not displayed/
unexpected indoor units are displayed.
Check if wiring is properly done, or the address setting for air
conditioners is correct.
→After correction, redo from step 2.
Enter the central address.
4
To assign manually
Select the central address
text box of the indoor unit on
the [A/C Unit List] screen,
and enter it.
5
Press
.
• The input central address is applied to all the indoor units.
• If the text box is blank or any duplication is present between
main indoor units, an alarm is displayed.
Attention
• Be sure to set the central address for the indoor unit to control
and monitor using the cloud adaptor.
Air Conditioner Test Operation
1
Check if
and
2
Press
.
• Check if pressing the button switches the ON/OFF display in the
control fi eld of the corresponding indoor units and the ON/OFF
operation of the actual indoor units.
• Check all the indoor units for proper operation.
• Check the status while communicating with the PC operator.
3
Press
.
• The main menu is displayed.
• If [Confi rm central address] button is not pressed after changing
the central address, a confi rmation screen is displayed.
→Selecting [YES] discards the changed contents.
12
(continued)
Meaning
Central address is duplicated.
A time-out occurred while
scanning.
To assign automatically
Press
.
(Values that have been unused
within the same link no. are
input in the blank fi eld in
ascending order.)
properly work.
1
If the red characters are displayed, confi rm and adjust the connections/
settings of the air conditioner.
4
3
2
4
An alarm that has occurred on the indoor unit is displayed.
(This screen is updated every 10 seconds.)
If the alarm code is related to the confi guration error, check and
fi x the connections/settings of the air conditioners.
1
3
5
2
Advertisement
Table of Contents
