STeP 5:
(See FIGUre 5)
•
Attach the upper handle tube to the middle handle
tubes using two carriage bolts (D) and wing knobs
(A). Keep the cord holder above the carriage bolt and
wing knob while assembling.
FIGUre 5
STeP 6:
(See FIGUre 6)
•
Clip the power cord holders (B) onto the lower and
upper handle tubes and then clip the power cord into
the holders.
FIGUre 6
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
D
A
B
B
STeP 7:
(See FIGUre 7)
•
Connect the bag support clip (C) to the lower handle
tube.
FIGUre 7
STeP 8:
(See FIGUre 8)
•
Connect the bag rods to the dethatcher.
•
Connect the bag support strap to the bag support
clip.
FIGUre 8
C
5