System Board - HP ZHAN X 13 G2 Maintenance And Service Manual

System board

All system board spare part kits include the processor, a graphics subsystem with UMA memory, and
replacement thermal material.
Table 6-9 System board descriptions and part numbers
Description
Equipped with an Intel Core i7-8565U processor and the Windows 10 operating system
Equipped with an Intel Core i7-8565U processor and a non-Windows 10 operating system
Equipped with an Intel Core i5-8265U processor and the Windows 10 operating system
Equipped with an Intel Core i5-8265U processor and a non-Windows 10 operating system
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the memory module EMI cover (see
When replacing the system board, be sure to remove the following components (as applicable) from
the defective system board and install them on the replacement system board:
● Memory modules (see
WLAN module (see
●
Solid-state drive (see
●
Heat sink (see
●
Fan (see
●
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Webcam cable
(2) WLAN module antenna cables
(3) Speaker cable
(4) Display cable
(5) Power button board cable
(6) Card reader board cable (ZIF)
(7) Keyboard backlight cable (ZIF)
(8) Keyboard cable (ZIF)
(9) RTC battery cable
(10) Fingerprint board cable (ZIF)
48 Chapter 6 Removal and replacement procedures for authorized service provider parts
Bottom cover on page
Battery on page
Memory module on page
WLAN module on page
Solid-state drive on page
Heat sink on page 46)
Fan on page 45)
(Preparation for disassembly on page
28).
30).
Memory module on page
35)
31)
33)
Spare part number
L65219-601
L65219-001
L65218-601
L65218-001
37).
35).