Installation - HAMPTON BAY WARWICK LDN1603AX-01/BR Use And Care Manual

Installation (continued)
Installing the arm to the wall
1
plate
□
Place the hole on the bottom of the arm (A) align
the hole of wall plate (I).
□
Screw the set screw (H) into the wall plate(I) to
fixed the arm (A).
3
Making the electrical connections
□
Wrap the ground wire from the fixture around the
ground screw (DD) on the cross bar (EE). Use a wire
connector (AA) to connect the end of the ground wire
from the fixture to the ground wire from the outlet box.
□ Use a wire connector (AA) to connect the white wire from
the fixture to the white wire (neutral wire) from the outlet box.
□ Use a wire connector (AA) to connect the black wire from
the fixture to the black wire (live wire) from the outlet box.
□ Wrap the three wire connections with electrical tape for a
more secure connection.
□ Position the wires back inside the outlet box.
Attaching the cross bar to the
2
outlet box
□ Screw the mounting screws (CC) into the inner
hole of the cross bar (EE) so that the threads face
out.
□ Mount the cross bar (EE) to the outlet box (not
included) using the outlet box screws (BB).
□ Make sure the threads of the mounting screws
(CC) are facing out when the cross bar (EE) is
attached to the outlet box.
5
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM