Download
Share
Print this page
  1. Manuals
  2. Brands
  3. VIGO Manuals
  4. Bathroom Fixtures
  5. VG06046
  6. Installation manual

VIGO VG06046 Installation Manual

Shower enclosure
Hide thumbs

Advertisement

Quick Links

Download this manual
VIGO INDUSTRIES INSTALLATION GUIDE FOR
SHOWER ENCLOSURE (MODEL VG06046)
!
SAFETY PRECAUTIONS
This Installation Guide uses the following symbols to indicate important information.
Always observe the instructions indicated by these symbols.
!
WARNING
Instructions that, if ignored, could result in death or serious personal injury caused by
incorrect handling or installation of the product. These instructions must be observed for
safe installation.
IMPORTANT
Maintenance and other important non-personal injury and non-material damage instructions
or statements that should be observed.
It is highly advised to dry fit the unit prior to any installation.
*VIGO reserves the right to modify/update all hardware and glass components based on
bettering the product for the end user's experience. If you have any questions contact VIGO
Tech Support at 1-866-591-7792.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the VG06046 and is the answer not in the manual?

Questions and answers

Related Manuals for VIGO VG06046

Summary of Contents for VIGO VG06046

  • Page 1 It is highly advised to dry fit the unit prior to any installation. *VIGO reserves the right to modify/update all hardware and glass components based on bettering the product for the end user's experience. If you have any questions contact VIGO Tech Support at 1-866-591-7792.
  • Page 2 MODEL VG06046 CASPIAN INSTALLATION INSTRUCTIONS FOR SHOWER DOOR PLEASE READ INSTRUCTIONS BEFORE PROCEEDING Parts List 1. Plastic anchors white (4pc) 9. Door threshold cap (2pc) 2. Wall mount bracket (2pc) 10. Phillips screw 3/4" (4pc) 3. Hex screw 1 5/8" (4pc) 11.
  • Page 3 A, B & C DIMENSIONS WERE MEASURED AFTER SHOWER ENCLOSURE WAS COMPLETELY INSTALLED Product lines may change, contact your Vigo representative at 1-866-591-7792 or visit our website at www.vigoindustries.com for the most up to date product line information. MODEL VG06046...

  • Page 4: Before Starting

    Compare items on your invoice with what you have received. Carefully review the Parts List on page 2. If any items are missing, please call Vigo Industries at 1-866-591-7792. Please check our website at www.vigoindustries.com for additional information or instructional videos.

  • Page 5: Installation Steps

    (#7) into the shower first making sure to rest the glass in a manner that the glass or base/tub does not incur damage. Make sure you have the inner door facing right side up before proceeding. MODEL VG06046...
  • Page 6 Place the structural rail (#4) into the cabin opening. Make sure that the wall mount brackets (#2) are assembled on the rail before doing this. Make sure the structural rail is level. Mark the location of the wall mount brackets (#2) on the wall. MODEL VG06046...
  • Page 7 PLATE There is a 7mm adjustment built into each plate. Drill holes where you marked the walls and place plastic anchors (#1) inside them. Preferred method of installation negates anchors and has the installation going right into studs. MODEL VG06046...
  • Page 8 Lock the bracket body to the plate SCREW with the supplied allen key (note the (ON TOP) screws should be at the top of the rail). Make sure the structural rail is level. BRACKET BODY PLATE MODEL VG06046...
  • Page 9 INSTALLING THE INNER DOOR PANEL INSIDE OF Screw the double rollers (#8) to the inner THE SHOWER door panel (#7) using the allen key supplied. SMALL HEX HOLE MODEL VG06046...
  • Page 10 Position the inner door panel (#7) into the back of the structural rail (#4). Find the center point of your shower opening and mark a line. CENTER OF SHOWER OPENING MODEL VG06046...
  • Page 11 Remove the inner door panel (#7). Position the door threshold (#11) into the bottom door guide (#13) and place the bottom door guide to where you have marked. Mark the hole locations for the bottom door guide (#13) and door threshold (#11). MODEL VG06046...
  • Page 12 Replace the door bottom guide (#13) and door threshold (#11) and screw them to the floor with 3/4" screws (#10). Place the door threshold cap (#9) over the end of the threshold and slide it towards the wall. Repeat for the other side. MODEL VG06046...
  • Page 13 (#4) and bottom door guide (#13). INSTALLING THE OUTER DOOR PANEL Screw the single rollers (#14) to the outer door panel (#15) using the allen key INSIDE OF supplied. THE SHOWER SMALL HEX HOLE ROLLER MODEL VG06046...
  • Page 14 Place the two top rollers and the outer door panel (#15) assembly onto the structural rail (#4). Verify that the bottom of the door rests in the front notch of the bottom door guide (#13). MODEL VG06046...

  • Page 15: Installing The Handle

    C1. INSTALLING THE HANDLE Install the handles (#6) as shown. CLEAR WASHER GLASS SUPPORT CLEAR WASHER HEX SCREW OUTSIDE HEX SCREW HANDLE COVER (#16) INSIDE HANDLE GLASS SUPPORT CLEAR WASHER HEX SCREW CLEAR WASHER HEX SCREW COVER (#16) MODEL VG06046...
  • Page 16 Start at the bottom and work your way up, using the heel of your hand to firmly press the seal strip onto the glass. APPLYING THE SILICONE Apply clear silicone caulking along the threshold of the shower enclosure interior. MODEL VG06046...
  • Page 17 In order to keep your shower enclosure in optimal working condition, Vigo recommends regularly inspecting your enclosure and tightening any hardware that may have loosened during use. This simple step will insure optimal results from your Vigo shower enclosure for many years to come.
  • Page 18 VIGO or an authorized VIGO dealer. VIGO warrants the seal strip components of the Product to be free from defects in workmanship and materials under normal use and service for a period of one (1) year from the initial date of purchase by the owner or end-user, contractor, or builder, from VIGO or an authorized VIGO dealer.