Table of Contents
Advertisement
Quick Links
VIGO INDUSTRIES INSTALLATION GUIDE FOR
SHOWER ENCLOSURE (MODEL VG06045)
!
SAFETY PRECAUTIONS
This Installation Guide uses the following symbols to indicate important information.
Always observe the instructions indicated by these symbols.
!
WARNING
Instructions that, if ignored, could result in death or serious personal injury caused by
incorrect handling or installation of the product. These instructions must be observed for
safe installation.
IMPORTANT
Maintenance and other important non-personal injury and non-material damage instructions
or statements that should be observed.
It is highly advised to dry fit the unit prior to any installation.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VIGO VG06045
Summary of Contents for VIGO VG06045
- Page 1 VIGO INDUSTRIES INSTALLATION GUIDE FOR SHOWER ENCLOSURE (MODEL VG06045) SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols. WARNING Instructions that, if ignored, could result in death or serious personal injury caused by incorrect handling or installation of the product.
- Page 2 15. Green Plastic Anchor (1pc) 16. White Plastic Anchor (6pc) 17. Hex Screw Cover (15pc) 18. Allen Key Pack (1 pack) 19. Door Seal Strip (2pc + 1 extra) GLASS THICKNESS:10mm NOTE: INSTALLATION MUST BE DONE BY A QUALIFIED, LICENSED PROFESSIONAL. MODEL VG06045...
- Page 3 30 3/8" x 72 3/4" 60"-62" 33 1/2" x 71 1/2" 72 3/4" 62X74 62"-64" 34 1/2" x 71 1/2" 31 3/8" x 72 3/4" 72 3/4" 64X74 A & B DIMENSIONS WERE MEASURED AFTER SHOWER ENCLOSURE WAS COMPLETELY INSTALLED MODEL VG06045...
-
Page 4: Before Starting
BEFORE STARTING Compare items on your invoice with what you have received. Carefully review the Packing List on page 2. If any items are missing, please call Vigo Industries at 1-866-591-7792. REQUIRED TOOLS: - Square and/or Phillips #1 and #2 screwdriver - Flat head screwdriver - Electric drill;... - Page 5 Install the mounting clips from (#1A) using part (#13) making sure that both sides are level. Replace the bottom structural rail (#9) with the housings to (#1A) loosely attached and slide against the wall. Tighten the hex screws. [SEE FIG.2D] MODEL VG06045...
- Page 6 23 3/4" (603mm) 60X74 28 3/4" (730mm) 62X74 29 3/4" (755.5mm) 64X74 30 3/4" (781mm) FIG.2 FIXED PANEL HOLDER ARROW MARKER VIEW FROM THE INSIDE FIG.2A HOUSING SCREW COUNTER CLOCKWISE TO LOOSEN FOR ACCESS TO MOUNTING CLIP MOUNTING CLIP FIG.2B MODEL VG06045...
- Page 7 LEVEL FIG.2C HEX SCREWS VIEW FROM THE INSIDE VIEW FROM THE OUTSIDE FIG.2D MODEL VG06045...
- Page 8 Place the fixed panel holder (7) into the notch at the bottom of the fixed panel. Place the screw through the notch. Screw the cap back on from the other side of the glass. [SEE FIG.5] THIN GASKETS WALL FIG.3 SIDE 5mm ADJUSTMENT FIG.3A MODEL VG06045...
- Page 9 Note: The housing to the top wall mount bracket assembly (#1) will need to be unthreaded in order to install the mounting clips. [SEE FIG.6A] Replace the structural rail and slide mounting brackets against the wall. Tighten the hex screws. [SEE FIG.7] MODEL VG06045...
- Page 10 TOP ROLLER GUIDE (2) LEVEL INSIDE OF OUTSIDE OF SHOWER SHOWER FIXED PANEL (4) FIG.6 SCREW COUNTER CLOCKWISE TO LOOSEN FOR ACCESS TO MOUNTING CLIP HOUSING MOUNTING CLIP FIG.6A COMPLETED FIG.7 MODEL VG06045...
-
Page 11: Installing The Door
Fully tighten the adjustment screws and re-install the roller covers. [SEE FIG.8] ROLLER COVER ROLLER (3) ROLLER HEIGHT ADJUSTMENT SCREW FIG.8 MODEL VG06045... - Page 12 WALL SIDE FIG.9 TOP ROLLER GUIDE (2) HEX SCREWS INSIDE OF OUTSIDE OF SHOWER SHOWER FIXED PANEL (4) DOOR PANEL (5) FIG.10 MODEL VG06045...
-
Page 13: Installing The Handle
Install the handle as shown. Make sure to have gaskets between any metal and glass. [SEE FIG.12] DOOR PANEL (5) DOOR PANEL (5) HANDLE ASSEMBLY (6) PHILLIPS SCREW GASKET PHILLIPS SCREW GASKET SCREW GASKET HANDLE ASSEMBLY (6) HANDLE ASSEMBLY (6) PHILLIPS PHILLIPS SCREW HANDLE SCREW SCREW ASSEMBLY (6) FIG.12 MODEL VG06045... -
Page 14: Installing Covers
Install roller covers. There is no need to install silicone between the roller cover and the roller. Applying silicone here will not allow for future height modification. IMPORTANT WAIT 24 HOURS BEFORE USING SHOWER DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIPS. MODEL VG06045... - Page 15 In the case that your wall is off on the bottom, the rollers should be adjusted as shown in Fig. 4. ROLLER (3) ROLLER HEIGHT ADJUSTMENT SCREW FIG. 1 Lowest position Normal position Highest position FIG. 1A IMPORTANT NOTE: These adjustments are approximate. You may need to adjust the roller height adjustment screw to meet your needs. MODEL VG06045...
-
Page 16: Straight Walls
The roller height adjustment screw adjustment screw is in the normal is in the normal position position STRAIGHT WALLS ROLLER "A" ROLLER "B" WALL DIRECTION ROLLER HEIGHT ROLLER HEIGHT ADJUSTMENT SCREW ADJUSTMENT SCREW STRAIGHT WALL NORMAL NORMAL FIG. 2 MODEL VG06045... - Page 17 The roller height adjustment screw adjustment screw is in the lowest is in the highest position position TOP ANGLED WALL ROLLER "A" ROLLER "B" WALL DIRECTION ROLLER HEIGHT ROLLER HEIGHT ADJUSTMENT SCREW ADJUSTMENT SCREW TOP ANGLED LOWEST HIGHEST FIG. 3 MODEL VG06045...
- Page 18 The roller height adjustment screw adjustment screw is in the highest is in the lowest position position BOTTOM ANGLED WALL ROLLER "A" ROLLER "B" WALL DIRECTION ROLLER HEIGHT ROLLER HEIGHT ADJUSTMENT SCREW ADJUSTMENT SCREW BOTTOM ANGLED HIGHEST LOWEST FIG. 4 MODEL VG06045...
- Page 19 VG06045 RIGHT DOOR OPENING VG06045 LEFT DOOR OPENING MODEL VG06045...
- Page 20 - Make sure to regularly inspect your Vigo Brand shower enclosure and tighten any hardware that may have loosened during the use process. Vigo understands that your home is a moving entity and designs the Vigo Brand shower enclosure to adjust to your home needs.
- Page 21 Subject to the Warranty Service provision below, any product reported to the authorized dealer or to VIGO as being defective within the warranty period will be repaired or replaced (with a product of equal value) at the option of VIGO. This warranty extends to the original owner or end-user and is not transferable to a subsequent owner.
Need help?
Do you have a question about the VG06045 and is the answer not in the manual?
Questions and answers