VIGO VG06061 Installation Manual

Standing shower cabin
Hide thumbs Also See for VG06061:

Advertisement

Quick Links

VIGO INDUSTRIES INSTALLATION GUIDE FOR
STANDING SHOWER CABIN (MODEL VG06061)
SAFETY PRECAUTIONS
This Installation Guide uses the following symbols to indicate important information.
Always observe the instructions indicated by these symbols.
WARNING
Instructions that, if ignored, could result in death or serious personal injury caused by
incorrect handling or installation of the product. These instructions must be observed for
safe installation.
CAUTION
Instructions that, if ignored, could result in personal injury or material damage caused by
improper handling or installation of the product. These instructions must be observed for
safe installation.
IMPORTANT
Maintenance and other important non-personal injury and non-material damage instructions
or statements that should be observed.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VG06061 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VIGO VG06061

  • Page 1 VIGO INDUSTRIES INSTALLATION GUIDE FOR STANDING SHOWER CABIN (MODEL VG06061) SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols. WARNING Instructions that, if ignored, could result in death or serious personal injury caused by incorrect handling or installation of the product.
  • Page 2: Packing List

    VIGO INDUSTRIES INSTALLATION GUIDE FOR STANDING SHOWER CABIN (MODEL VG06061) PACKING LIST: 1. Wall connector (2pc) 7. Glass support (4pc) 14. Door side seal strip (2pc) 2. Structural arm (2pc) 8. Hinge (2pc) 15. Door bottom seal strip (2pc) 3. Support assembly (2pc) 9.
  • Page 3 MODEL VG06061...
  • Page 4: Before Starting

    Apply a bead of silicone between the walls and base of the stall. • For optimum performance, you should install the shower door perfectly level on a level surface. MODEL VG06061 HAS A REVERSIBLE DOOR AND CAN THEREFORE BE INSTALLED TO EITHER THE RIGHT OR LEFT SIDE (SEE CONFIGURATION DIAGRAM BELOW)
  • Page 5 3. Seal the bottom rail with clear silicone caulk and center its sides to the base. 4. Apply silicone to the 3/4” screw (#18) threads. [SEE FIG.2A] 5. Screw the bottom rail to the base with the screws. 6. Clip the aluminum cover on to the center piece of the bottom rail. MODEL VG06061...
  • Page 6 (#19) inside them. 8. Place the side glass panel back onto the bottom rail and screw it to the wall with 2” screws (#17). 9. Repeat Steps 1 through 8 for the unhinged side glass panel (#5). MODEL VG06061...
  • Page 7: Installing The Handle

    (#8) are to be installed with rubbing alcohol. 2. Position hinges on the side glass panel. [SEE FIG.6] 3. Place washers on each side of the side glass panel. Screw the hinges to the side glass panel with the hex key (supplied). MODEL VG06061...
  • Page 8 2. Cut the seal strips according to the diagram. [SEE FIG.7] 3. Verify that the lips of both seal strips face toward the inside of the shower cabin before seal strip installation. 4. Install the seal strips according to the diagram. MODEL VG06061...
  • Page 9: Installing The Door Panel

    4. Remove the support assembly. Drill holes into respective marks and put plastic anchors (#19) in them. 5. Replace wall connector to proper position. Screw it in to the wall with 1-1/8” screws (#16). 6. Tighten all screws. MODEL VG06061...
  • Page 10 2. Apply silicone caulk from the inside between the bottom of side glass panels (#4, #5) and bottom rail. 3. Apply silicone caulk around the inside perimeter of the bottom rail. IMPORTANT • WAIT HOURS BEFORE USING SHOWER. • DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIP. MODEL VG06061...
  • Page 11 • Do NOT use abrasive cleaners, scrapers, metal brushes, or any items/products that would scratch and/or dull surface. • Do NOT allow surface to come into contact with acetone (nail polish remover), dry cleaning solution, lacquer thinner, gasoline, or any other similar product. MODEL VG06061...
  • Page 12: Limited Warranty

    VIGO warrants faucets to be free from defects in workmanship and materials under normal use and service for a period of one (1) years from the initial date of purchase by the owner or end-user, contractor, or builder, from an authorized dealer.

Table of Contents