Table of Contents
Advertisement
Cooking assist functions
en
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
Make sure that the silicone path is completely dry
■
before attaching the temperature sensor.
Position the cookware in such a way that the
■
temperature sensor is pointing towards the outer
side of the hob.
To prevent overheating, the temperature sensor
■
must not be pointed towards another item of
cookware that is hot.
Remove the temperature sensor from the saucepan
■
after cooking. Store it in a clean, safe place away
from sources of heat.
Cleaning
Do not clean the wireless temperature sensor in the
dishwasher.
You can find information on cleaning the temperature
sensor in the section on ~ "Cleaning"
Changing the battery
I f the temperature sensor does not light up when the
C h a n g i n g t h e b a t t e r y
symbol is pressed, the battery is flat.
Changing the battery:
Remove the silicone cover from the lower section of
1.
the temperature sensor housing and remove both
screws using a screwdriver.
32
Open the closure of the temperature sensor.
2.
Remove the battery from the lower section of the
housing and insert a new battery (pay attention to
the correct orientation of the battery poles).
Caution!
Do not use any metal objects to remove the battery.
Do not touch the battery connection points.
Close the closure of the temperature sensor (the
3.
notches for the screws on the closure must align
with the notches on the lower section of the
housing). Tighten the screws with a screwdriver.
Reattach the silicone cover to the lower section of
4.
the temperature sensor housing.
Use only high-quality batteries of the type
Note:
CR2032 in order to guarantee a long service life.
Advertisement
Table of Contents
