Hydraulic System - HAKO Sweepmaster P900 R Operating Manual

Maintenance and servicing

5.3.4 Hydraulic system

The hydraulic units are maintenance
free. Maintenance work concentrates
on filter changes.
Premature failures can be prevented
by regular monitoring and periodic
maintenance.
We recommend that you have
all work on the hydraulic
system that goes beyond the
frame carried out only by facto-
ry-trained specialists.
Hydraulic oil
The machine is filled at the factory with
one of the following hydraulic oils:
- Mobil DTE 10 Excel 46 (HVLP,
zinc free)
- TOTAL EQUIVIS AF 46 (HVLP,
zinc free)
- Panolin HLP Synth 46 (HEES,
biodegradable)
The designation of the hydraulic oil
used in your machine is stated on the
adhesive label (Fig. 23/1) on the hy-
draulic tank. Mixing different hydraulic
oils is not permitted. This may reduce
the efficiency and reliability of your ma-
chine. Hydraulic components could be
damaged. Always use the identical oil
for topping up. If all of the hydraulic oil is
replaced, the usual procedures must be
noted (e.g. flush several times, maxi-
mum residual hydraulic oil content:
2 %).
The above-mentioned hydraulic oils are
coordinated with the climatic conditions
in central Europe. If the machine is
used under other climatic conditions,
hydraulic oil in a different viscosity class
must be used if necessary.
Contact Hako if you wish to use a differ-
ent hydraulic oil.
1
Fig. 24 Hydraulic oil tank
51